Advertisement
Quick Links
Thank you for choosing this product
Silverline Tools 3 Year Guarantee
• This guarantee becomes effective at the date of retail purchase.
PLEASE KEEP YOUR RECEIPT.
• If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the fault.
You will receive a replacement or refund.
• If this product develops a fault within 3 years of purchase return it to;
Silverline Tools Service Centre
PO Box 2988
BA21 1WU
Include your original receipt, details of the fault, your name and address, place and
date of purchase. We do not refund carriage. All products should be in a suitably
clean and safe state for repair, and should be packaged carefully to prevent damage
or injury during transportation. We may reject unsuitable or unsafe deliveries.
• You must provide proof of purchase before any work can be carried out.
• All work will be carried out by Silverline Tools or its authorised repair agents.
• Any parts which are replaced will become the property of Silverline Tools.
• The repair or replacement of the product will not extend the period of guarantee.
• The repair or replacement of your product under guarantee provides benefits which
are additional to and do not affect your statutory rights as a consumer.
What is covered:
• The repair of the product, if found to be defective due to faulty materials or workmanship
within 3 years of purchase. If any part is not available or out of manufacture,
Silverline Tools will replace it with a functional replacement part.
• Use of the product in the UK.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
• Normal wear and tear e.g blades, brushes, belts, bulbs, batteries etc.
• Accidental damage, faults caused by negligent use or care,
misuse, neglect, careless operation or handling of the product.
• Use of the product for anything other than normal domestic purposes.
• Change or modification of the product in any way.
• Use of parts and accessories which are not Silverline Tools genuine components.
• Faulty installation (except installed by Silverline Tools).
• Repairs or alterations carried out by parties other than
Silverline Tools or its authorised repair agents.
634009_Instructions.indd 1
Yeovil
Users Manual
52cc Petrol Chainsaw
508mm (20") Bar
Product Code 634009
© December 2007
16/11/2010 12:32
Advertisement
Related Manuals for Silverline 634009
Summary of Contents for Silverline 634009
- Page 1 • The repair or replacement of the product will not extend the period of guarantee. • The repair or replacement of your product under guarantee provides benefits which are additional to and do not affect your statutory rights as a consumer. What is covered: • The repair of the product, if found to be defective due to faulty materials or workmanship within 3 years of purchase. If any part is not available or out of manufacture, Silverline Tools will replace it with a functional replacement part. • Use of the product in the UK. What is not covered: Silverline Tools does not guarantee repairs required as a result of: Users Manual • Normal wear and tear e.g blades, brushes, belts, bulbs, batteries etc. • Accidental damage, faults caused by negligent use or care, 52cc Petrol Chainsaw misuse, neglect, careless operation or handling of the product. • Use of the product for anything other than normal domestic purposes. • Change or modification of the product in any way. 508mm (20") Bar • Use of parts and accessories which are not Silverline Tools genuine components.
- Page 2 Product Familiarisation Introduction Keep your balance This manual is an integral part of the chainsaw and should be kept • Don’t over reach, keep proper footing at all times to ensure with it at all times. If the chainsaw is re-sold this manual should be correct balance.
- Page 3 PRIOR TO USE NOTE: Adjusting carburettor (Fig. 4) Installing guide bar and saw chain Do not use waste or re-generated oil as this will cause damage Fig.4 Open the box and install the guide bar and the saw chain on the to the oil pump.
- Page 4 Sawing Bucking and limbing WARNING! WARNING! A log hanging off the ground (Fig. 9) 2. Oiling port • Before proceeding to your job, read the following sections. It is • Always ensure your foothold. Do not stand on the log. In area A, saw up from the bottom one-third and finish by sawing Dismount the guide bar and check the oiling port for clogging.
-
Page 5: Troubleshooting Guide
Maintenance of saw chain and guide bar After every cutter has been set, check the depth gauge and file it to Fuel and oil the proper level as illustrated. (Fig. 14). • NEVER store the unit with fuel in the tank in an environment Saw chain where petrol fumes could come into contact with a flame, spark WARNING!
Need help?
Do you have a question about the 634009 and is the answer not in the manual?
Questions and answers