Silverline 633855 User Manual

Silverline 633855 User Manual

45cc petrol chainsaw 455mm (18”) bar

Advertisement

Quick Links

Thank you for choosing this product

Silverline Tools 1 Year Guarantee

• This guarantee becomes effective at the date of retail purchase.
PLEASE KEEP YOUR RECEIPT.
• If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the fault.
You will receive a replacement or refund.
• If this product develops a fault within 1 year of purchase return it to;
Silverline Tools Service Centre
PO Box 2988
Include your original receipt, details of the fault, your name and address, place and
date of purchase. We do not refund carriage. All product should be in a suitably
clean and safe state for repair, and should be packaged carefully to prevent damage
or injury during transportation. We may reject unsuitable or unsafe deliveries.
• You must provide proof of purchase before any work can be carried out.
• All work will be carried out by Silverline Tools or its authorised repair agents.
• Any parts which are replaced will become the property of Silverline Tools.
• The repair or replacement of the product will not extend the period of guarantee.
• The repair or replacement of your product under guarantee provides benefits which
are additional to and do not affect your statutory rights as a consumer.
What is covered:
• The repair of the product, if found to be defective due to faulty materials or workmanship
within 1 year of purchase. If any part is not available or out of manufacture,
Silverline Tools will replace it with a functional replacement part.
• Use of the product in the UK.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
• Normal wear and tear e.g blades, brushes, belts, bulbs, batteries etc.
• Accidental damage, faults caused by negligent use or care,
misuse, neglect, careless operation or handling of the product.
• Use of the product for anything other than normal domestic purposes.
• Change or modification of the product in any way.
• Use of parts and accessories which are not Silverline Tools genuine components.
• Faulty installation (except installed by Silverline Tools).
• Repairs or alterations carried out by parties other than
Silverline Tools or its authorised repair agents.
633855-Instructions.indd 1
Yeovil
BA21 1WU
Users Manual
45cc Petrol Chainsaw
455mm (18") Bar
Product Code 633855
© December 2006
26/3/07 17:05:52

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 633855 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Silverline 633855

  • Page 1 • You must provide proof of purchase before any work can be carried out. • All work will be carried out by Silverline Tools or its authorised repair agents. • Any parts which are replaced will become the property of Silverline Tools.
  • Page 2 • Always secure work. Where practical use a clamp or vice, it will cutting attachment: 1000RPM Sound Power 110dB allow you to use both hands to operate your tool. 2800RPM 2.92m/s Maximum engine speed at idling: Weighted vibration Maximum cutting: 450mm 633855-Instructions.indd 2 26/3/07 17:05:54...
  • Page 3 Use motor oil SAE# 10W ~ 30 all year round or SAE #30 ~ #40 in (1) Chain oil 5. Fit the chain cover to the power unit and fasten the nuts to finger summer and SAE#20 in winter. (Fig.6). (2) Fuel 633855-Instructions.indd 3 26/3/07 17:05:56...
  • Page 4 finish by sawing up from the bottom. the unit should be set to operate in anti-freeze mode before use. lever and keep the engine idling. maintain the kickback safety level of this saw. Removal of the safety 633855-Instructions.indd 4 26/3/07 17:05:56...
  • Page 5 (Fig. 34). Disassemble the filter and wash with gasoline, or replace with new one if needed. 6. Front and rear dampers Replace if adhered part is peeled or crack is observed on the rubber part. 633855-Instructions.indd 5 26/3/07 17:05:57...
  • Page 6: Trouble Shooting Guide

    In order to avoid cuts when handling the chain always wear gloves. • Every 3 times the blades are sharpened check the height of the 633855-Instructions.indd 6 26/3/07 17:05:58...

Table of Contents