HIKVISION DS-2CD2612F-I(S) Quick Manual page 10

4
5
6
7
8
9
10
11
12
Notes:
 To reset the default parameters to the camera, you need to press and hold the
reset button and power on the camera. After the power on the camera, you
must still press and hold the reset button for about 10 seconds.
 The DS-2CD2612F-IS and DS-2CD2632F-IS models support audio and alarm
functions. The interfaces are shown as follows.
Network Camera·Quick Guide
Video Output Interface
Figure 1-2 Audio and Alarm Interfaces
IR LED
Lens
Air Vent
Integrated Bracket
Reset Button
SD Card Slot
Power Interface
Network Interface
9
Audio
Alarm