Setting The Travel Limits - Ducati 8500 SF Assembly Instructions Manual

12. Setting the travel limits

Warning:
The electronic panel is on step-by step operating function =
"TIME" adjustment screw must be rotated clockwise all the way. See page 20;
Travel limits are the points at which the door will stop during each up or down operation. The 2 limit flags,
red and green, will stop the door movement when they come into contact with the limit switch.
Red Flag = closed door
Green Flag = open door
1) When the door is closed: Position the red flag to touch the limit switch (Figure 47).
2) When the door is open: Position the green flag to touch the limit switch (Figure 48).
To set the travel limits:
- Unlock the trolley (see page 15).
- Manually close the door.
- With the door is in closed position, unscrew the red flag slightly, move it, and position it to touch the
limit switch (the limit switch must be pressed by the red flag).
- Press your remote control to activate the opener. It will automatically relock the trolley while moving.
- While the door starts to open, unscrew the green flag slightly, move it, and when the door is in the
desired open position, tightly screw in the green flag to touch the limit switch (the limit switch must be
pressed by the green flag).
Figure 47
DOOR CLOSED:
when the door is in the
closed position, the red
flag must touch the
limit switch.
Figure 48
DOOR OPEN:
When the door is in
the desired open
position, the green
flag must touch the
limit switch.
To set travel limits, you must check that:
Trolley: When the
door is closed, the
shuttle is in the
front position.
Trolley: When the
door is open, the
shuttle is in back
position.
Red Flag
Limit
switch
Limit
Green Flag
switch
Page 19