Power Supply - Ducati 8500 SF Assembly Instructions Manual

Cable connection to manually unlock the door from inside
and outside.
Connect the cable to the handle. Turn the handle to unlock.
8. 230V power supply wiring
Lift the motor cover (Figures 39-40).
Connect the 230 V 50/60 Hz input cable to the transformer terminal board (Figures 41, 42 and 43). A
fuse is mounted on the transformer to protect low voltage system (Figure 42).
We recommend using a cable compressor (not supplied) to attach the cable when passing it through the
motor plate (Figure 43).
Remember to check that the safety fuse is not blown, and if it is, replace it with a new one. When the
operation is finished, close the cover.
CAUTION: A high voltage supply must be connected by a
certified installer only! Working with 230V power is very
dangerous. Risk of serious injury or death!
Figure 39
Figure 41
motor
transformer
Figure 37
cable compressor
Figure 42
230V
Figure 38
822
door
handle
!
Figure 40
230V
Protection FUSE
5x 20 mm 1AT fast
811
cover
Figure 43
High voltage 230V
cable compressor
Page 16 Page 16