Specifications - Sony STR-ZA3000ES Startup Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated
100 watts per channel minimum RMS power, with no more than 0.09%
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
POWER OUTPUT 1) 2)
Rated Power Output at Stereo Mode
(6 ohms 20 Hz – 20 kHz, THD 0.09%): 100 W + 100 W
Reference Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%): 80 W + 80 W
Reference Power Output
(6 ohms 1 kHz, THD 0.9%)
FRONT: 120 W + 120 W
CENTER: 120 W
SURROUND: 120 W + 120 W
SURROUND BACK: 120 W + 120 W
Reference Power Output
(8 ohms 1 kHz, THD 0.9%)
STR-ZA3000ES
FRONT: 110 W + 110 W
CENTER: 110 W
SURROUND: 110 W + 110 W
SURROUND BACK: 110 W + 110 W
STR-ZA2000ES
FRONT: 100 W + 100 W
CENTER: 100 W
SURROUND: 100 W + 100 W
SURROUND BACK: 100 W + 100 W
STR-ZA1000ES
FRONT: 90 W + 90 W
CENTER: 90 W
SURROUND: 90 W + 90 W
SURROUND BACK: 90 W + 90 W
Reference Power Output at Surround Mode
(6 ohms, 1 kHz, THD 0.9%)
150 W per channel
1) Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
2) Depending on the sound field settings and the source, there may be
no sound output.
3) Reference power output for front, center, surround, surround back
speakers.
4)
Frequency response
SA-CD/CD, TV, AUX, VIDEO
Inputs (Analog)
SA-CD/CD, TV, AUX, VIDEO
4) When "2ch Analog Direct" is being used.
Inputs (Digital)
IN (BD/DVD) (Coaxial)
IN 1 (AUX), IN 2 (TV) (Optical)
Outputs
ZONE2, ZONE 3 (AUDIO OUT)
STR-ZA3000ES
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
STR-ZA2000ES/STR-ZA1000ES
SUBWOOFER
3)
10 Hz – 100 kHz
± 3 dB
Sensitivity: 150 mV
Impedance: 50 kohms
S/N 4) : 105 dB (A, 20 kHz LPF, 500 mV)
Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz LPF)
S/N: 96 dB
(A, 20 kHz LPF)
Voltage: 2 V
Impedance: 1 kohm
Voltage: 2 V
Impedance: 1 kohm
Voltage: 2 V
Impedance: 1 kohm
continued
15
US