Brookstone Aviator Mini Wireless Speaker User Manual

Fold
LITHIUM-ION BATTERY
WARNINGS
This device contains a non-removable
Aviator Mini Wireless
lithium-ion battery. The battery must be
recycled or disposed of properly.
Speaker
Contact your local waste management
BIG SOUND TO GO
office for information on battery
recycling or disposal.
FCC INFORMATION
This equipment has been tested
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
Fold Fold
• Reorient or relocate the
receiving antenna.
• Increase the distance between
the equipment and receiver.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
This equipment complies with
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
1. This equipment may not cause
harmful interference.
2. This equipment must accept any
interference received, including
interference that may cause
undesired operation.
Modifications not authorized by the
manufacturer may void the user' s
authority to operate this device.
Fold
PAIRING YOUR DEVICE
LOCATION OF PARTS
AND CONTROLS
1. Prepare your device to pair using
1. Dust Cover
2. Charging LED indicator
3. Micro USB Port
2. Press and hold the ' ' button until
4. Volume Down Button
5. Volume Up Button
6. Play/Pause Button
7. LEDs indicator
3. The speaker will wait for a
8. Micro USB Charging
Cable (not shown)
4. Once the speaker is in pairing
1
3
2
6
4 5
7
Bluetooth ® t chnology, making sure
you are within 33 feet of the speaker.
Refer to your device' s owners
manual for details if necessary.
the speaker power on enter auto-
pairing mode. The LEDs Indicator
light will flash quickly and the
speaker will sound beeps.
connection in pairing mode for
30 minutes. If it does not pair with
a device, it will power off.
mode and your device is ready
to pair, select "Jet speaker".
If prompted, use 0000 as a PIN
for the pairing code. Once the
speaker is selected, the LEDs
Indicator will flash slowly and
beeps will sound to confirm
pairing complete.