Shenzhen Union Security industry Co., Ltd 1. Product Profile Thank you for choosing our company's T360-103 GPS tracking products, please carefully read the instructions before operating. T360-103 satellite positioning system combined with positioning, monitor and observe, alarm for help, advertising, vehicle scheduling, image capture and tracking functions, it’s easy to use, easy to operate, the characteristics of a...
Page 4
Shenzhen Union Security industry Co., Ltd brochures to explain the following command operation for some of those involved in your password are the product's default password 【1234】 This product is not waterproof, choose the dry location to install, and pay attention to water moisture.
Shenzhen Union Security industry Co., Ltd 2. Technician parameter Name Parameter Gift Box Dimension 180mm × 128mm × 60mm Color Black Working voltage 9V -- 30V DC Working current 80 mA – 110 mA(12V/DC) Back-up battery life time Up to 1 hour...
Shenzhen Union Security industry Co., Ltd 3. T360-103Packing list 3.1. Standard Accessories Accessory QTY Image Function Packing 1PCS Gift box packing Main device 1PCS T360-103 main device 1PCS Receiving GSM network signal Antenna GPS Antenna 1PCS Receiving satellite locating signal data...
Shenzhen Union Security industry Co., Ltd Taxi camera Photographing in vehicles 3.3. Packing View and Serial setting cable T360-103 User’s Manual 7 / 22...
Shenzhen Union Security industry Co., Ltd 4. T360-103 Indicator light description LED light Light on Light off Description Green 5 seconds 1 second GPS located Green 1 second 1second GPS unlocated Green 0.5Second 0.5Second Initialization 1 second 1second Searching for GSM network 0.5S...
Shenzhen Union Security industry Co., Ltd 5. Functions Description 5.1. GPRS Mode Function 5.1.1. Real-time positioning Monitoring center can directly locate the specified vehicle terminal call view, in-car terminal will immediately return to the central monitoring platform details such as vehicle location data. Location information mainly include: time, longitude, latitude, speed, location, location signs, vehicles and terminal status.
Page 10
Shenzhen Union Security industry Co., Ltd abolition of alarm. Center received alarm data may confirm or cancel the alarm. Driving speed alarm set value in the 0-255 (km/h) range. Geo-fence alarm Exit into the Geo-fence alarm refers to the user to set up and one or more...
Shenzhen Union Security industry Co., Ltd Custom Defined Alarm The device with 2-way custom test line (the test line of the definition and installation please refer to the section described in the installation of the 【101A2B installation instructions】) in order to meet specific customer needs. When the user needs to customize sensor alarm function can be defined according to their own needs the name of the line alarm.
Shenzhen Union Security industry Co., Ltd time-related mileage statistics. The mileage statistics value no bigger than 16000 5.2. SMS Mode Function (Command list in appendix 1) 5.2.1. Real-time position Device user can use authorized cell phone number send TRACK ONCE command content to device, and device will reply real-time attitude and longitude to user’s...
Shenzhen Union Security industry Co., Ltd 6. Device Installation After you get T360-103 product, please familiar with it and test it before you install it in a Car, please check the packing list and make sure the packing and product quality well.
Page 14
Shenzhen Union Security industry Co., Ltd Step5.2 .Check communicate 3. Click to check if the serial communicate is ok Step5.3. Set center parameter and APN T360-103 User’s Manual 14 / 22...
Shenzhen Union Security industry Co., Ltd 6.3. Install in a car 6.3.1. Prepare for install This device using in 12V, 24V motor vehicles, will not conflict with the original car system, in order to facilitate fault diagnosis and unusual dispute after installation, please check the pre-installation inspection and truthfully inform the owner.
Page 16
Shenzhen Union Security industry Co., Ltd completely, otherwise it is possible the SIM car burnt. SIM card installation or removal required for "+" screwdriver inserted back-end of equipment, forced inside the top hole until the SIM card connectors automatically exit the host.
Page 17
Shenzhen Union Security industry Co., Ltd in the vehicle key insert part. Electricity Power cut wire control (yellow): T360-103 of the power control wire (yellow) is mainly used to meet with the power relay circuit to cut off the motor fuel or engine circuit, forced to stop the engine running.
Shenzhen Union Security industry Co., Ltd 6.3.3.5. Monitor Microphone (J1) Please pay attention to the monitor MIC, make sure it is far away from magnetic fields, such as: sound box speakers, power cord, usually installed on the cab roof near the top.
Shenzhen Union Security industry Co., Ltd 8. FAQ Problem Reason Solution 1. power of positive and negative reversed installed Power installed 2. the power of the cathode not connected; incorrectly 3. the original car is controlled by main power Light off after switch (mostly in 24V vehicle.)
Shenzhen Union Security industry Co., Ltd Appendix1. SMS Command List IUSSE SEND COMMAND ANSWER COMMAND REMARK SET SERVER IP AS1234IPPO:119.147.23.108;7 IPPO:119.147.23.108;7777,26339788;OK Response content is “IP””Port””Current Device ID” 777;# AND PORT SET TERMINAL ID AS1234IDDO:26339788# IDDO:26339788;OK Response Current Device “ID” Access Point AS1234APN:CMNET# APN:CMNET;OK...
Page 21
Shenzhen Union Security industry Co., Ltd Standby Mode 2、 Type and range:“0” Close;1~18:sleep for this time and wakeup for 25minutes. Standard function Communicate Mode AS1234SMGP:0# SMGP:UDP;OK 1、“0”UDP Mode; AS1234SMGP:1# SMGP:TCP;OK 2、“1”TCP Mode; AS1234SMGP:2# 3.、“2”SMS Mode SMGP:SMS;OK AS1234HOME:13510642316# Home Number Set HOME:13510642316;OK...
Page 22
Shenzhen Union Security industry Co., Ltd SET Speed Limit AS1234SPEED:120# ESPE:120;OK 1、Unit:“km/h” 2、Type and range:“0”cancel speed limit AS1234SPEED:0# ESPE:OFF;OK Value type:“0”forbid;“1”open User Defined Alarm AS1234 DEFINED1:1# User-defined1:ON;OK AS1234 DEFINED1:0# User-defined 1:OFF;OK (The alarm information will only send to authorized Number and center number when Device work in SMS mode ) Value type:“0”forbid;“1”open...
Need help?
Do you have a question about the AmwellT360-103 and is the answer not in the manual?
Questions and answers