Charging; Operating - Harbor Freight Tools LuminarWORK 69286 Owner's Manual & Safety Instructions

Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION
manual including all text under subheadings therein before set up or use of this product.

charging

Please Note: Spotlight will NOT operate during charging.
charging with A harging with Ac/Dc Adaptor: Adaptor:
1. Plug AC/DC Adaptor (21) into a 120V outlet.
2. Attach the end of the Adaptor cord to the Adaptor
Cord Inlet, located on the back of the Spotlight.
3. The Charge Light Indicator will light up. When
the Charge Light Indicator goes out, the Spotlight
is ready for use. Unplug the Adaptor.
General Operating Instructions
Using the Rechargeable Spotlight: Using the Rechargeable Spotlight:
1. Hold the Spotlight using the Pistol Grip.
2. Squeeze the Trigger. If you want the Spotlight
to stay on, slide the Lock Switch up while
squeezing the Trigger, then release the
Trigger and the Spotlight will stay on.
Item 69286
y y INFORMATION
pistol
Grip
Figure B
For technical questions, please call 1-800-444-3353.
section at the beginning of this
Adaptor plug Inlet lug Inlet
charge Light
Indicator
charging with 12V harging with 12V cigarette Lighter Adaptor: igarette Lighter Adaptor:
1. Plug into any 12V DC outlet in an automobile,
boat or RV, and then into the Adaptor Plug
Inlet located on the back of the Spotlight.
2. The Charge Light Indicator will light up. When
the Charge Light Indicator goes out, the Spotlight
is ready for use. Unplug the Adaptor.
Note: Spotlight will not operate during charging Spotlight will not operate during charging.
3. When finished using the Spotlight, release
the Trigger or push the Lock Switch
downward to turn the Spotlight off. Keep
Spotlight indoors away from children.
Page 5