4pos POS-400 Expander II User Manual page 20

5. Replace the CF cover and replace the main unit to an upright position.
6. Reconnect the power cord and any external devices, then turn on the system. The system should
automatically recognize the CF card when the system power is turned on.
NOTE: CF card and 2.5 inch HDD master/slave setting:
The system allows the use of both the CF card and hard disk at the same time,
however the user will need to set the system BIOS for the preferred boot order.
When either a CF card only or 2.5 inch hard disk only is installed, the BIOS will
automatically designate it as the 'master' drive and system boot device.
13