Table of Contents
Advertisement
If the setup is successful, the device will restart after 1min and no reply.
7.11 Restore factory setup
When sending incorrect command cause the device can't work as normal, you can setup restore factory message
to the device.
Format: factory#
If the setup is successful, the device will restore to be the default.
VII .Operating the device
8.1 Power on/ off
Power on: Put effective SIM card in to the device, and turn on the power, the power light will on and blink. After
the power is on, the device will begin to search the GSM network signal. At this time, the light will brighten 1s
and darken 2s. When the GPS is successful positioning, the light will brighten 1s and darken 2s.
Power off: Press power off button when the device is power on. The device can work as normal as long as the
SIM card is effective and has GPRS function. The device will send data to the backend server timing.
8.2 Address tracking
8.2.1 Address tracking by message
Format: where#
If the setup is successful, the device will reply you a address. If not it will reply "Unable to get GPS data correctly,
please try again! !"
Remark: This function need supported by platform.
8.2.2 Address tracking by web link
Format: url#
If your mobile phone has GPRS, WIFI or 3G function, you can open the web link and you will see the tracked
address by map. And you can also write down the link on your computer, then you will get the address.
8.2.3 Real time tracking on platform
You can login the GPS tracking platform to look the position.
8.3 SOS button
In case of emergency, please press SOS button, and the device will call the there SOS NO. you have set in
sequence. If no one answer SOS call, the device will stop call after twice.
Notice: The SOS alarm can only call the phone NO. you have setup.
8.4 Monitoring voice number setting
Advertisement
Table of Contents
