Installation Notes - OEM SNAV-1 Operation Manual

Do not install the display unit or Hide-away unit in places where it may become
subject to high temperatures or humidity, such as:
• Places close to a heater, vent or air conditioner.
• Places exposed to direct sunlight, such as on top of the dashboard or the rear
shelf.
• Places that may be splashed by rain, for example close to the door.
Install this product in an area strong enough to bear its weight. Choose positions
where the Navigation unit can be firmly installed and install it securely. If the
Navigation unit is not securely installed, the current location of the vehicle cannot be
displayed correctly.
Do not install the Navigation unit on the board covering the spare tire or other places
which are subject to vibration.
When the Navigation unit is installed under a front seat, ensure that it does not
obstruct the sliding action of the seat.
When installing the Navigation, choose a position that ensures there will be no
contact with luggage. The impact of a heavy weight or sudden shock on the
Navigation unit will adversely affect the accurate display of the current location of the
vehicle.
Avoid installing the Navigation unit in places where it will interfere with loading and
unloading of the spare tire, jack, tools, etc.
Install the Navigation unit horizontally on a surface within +30
0
to -30 0 tolerance
(within five degrees to the left or right of your vehicle's direction of travel).
Misinstalling the unit with the surface tilted more than these tolerances would
increase the potential for errors in the location display, and might otherwise cause
reduced display performance.
If installation angle exceeds 30° from horizontal, the display unit might not give its
optimum performance.
Installation Notes
6