Safety Instructions - OEM SNAV-1 Operation Manual

Safety Instructions
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE
CAUTION: To reduce the risk of fire and electric shock, do not remove the cover (or back)
of the unit. Refer servicing only to qualified service personnel.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT AND FULLY INSERT. The unit shall not be exposed to dripping or splashing
and that no objects filled iwth liquids, such as condensers or drain pipes, shall be placed
on the unit.
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your
DE RADIO Navigation product, safety is a major factor in the design of every instrument.
However, safety is your responsibility too. This sheet lists important information that will
help to assure your enjoyment and proper use of the navigation product and accessory
equipment. Please read them carefully before operation and using your navigation
product.
Installation
1. Read and Follow Instructions - All the safety and operating instructions should be
read before the navigation product is operated. Follow all operating procedures.
2. Retain instructions - The safety and operating instructions should be retained for
future reference.
3. Head All Warnings - Comply with all warnings on the navigation product and in the
operating instructions.
4. Power Sources - This navigation product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type of power
supply, consult your navigation provider. For navigation products intended to operate
from battery power, or other sources, refer to the operating instructions.
5. Attachments - Do not use attachments unless recommended by the navigation
product manufacturer as they may cause hazards.
6. Water and Moisture - Do not use this navigation product near water. Caution:
Maintain electrical safety. Electrically operated equipment or accessories connected
to this unit should bear a safety certification mark on the accessory itself and should
not be modified so as to defeat the safety features. This will help avoid any potential
hazard from electrical shock or fire. If in doubt, contact qualified service personnel.
7. Cleaning - Turn off the unit before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
8. Objects that may touch dangerous voltage points or "short-out" parts could result in a
fire or electric shock. Never spill liquid of any kind on the NAVIGATION product.
9. Servicing - Do not attempt to service the NAVIGATION product yourself, as opening
or removing covers may expose you to dangerous voltage or other hazards. Refer al
servicing to qualified service personnel.
10. Safety Check - Upon completion of any service or repairs to this NAVIGATION
product, ask the service technician to perform safety checks recommended by
the manufacturer to determin that the NAVIGATION product is in safe operating
condition.
11. Heat - The product should be situated away from heat sources.
3