Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pope 101HPV1800
Summary of Contents for Pope 101HPV1800
- Page 1 2-IN-ONE POWER WASH AND VAC 1800W Electric High Pressure Cleaner with 800W Reversible Air Flow Vacuum Model No. 101HPV1800 (101HPWASH1800 & 101HPVAC1800) Operator’s Manual WARNING To reduce the risk of injury, the user must read and understand the Operator’s Manual. Save this manual.
- Page 2 We would like you to be completely satisfied with your new product, so feel free to contact Pope for help with any information you require. Pope's Customer Service centre number is 1300 134 880. Please read this manual carefully to learn how to operate and maintain your product correctly.
-
Page 3: Safety Rules
SAFETY RULES WARNING Read and understand all instructions. Failure to follow all instructions may result in serious personal injury as well as damage to the product. • Physical Condition of the Operator. Do not operate this product when tired, ill or under the influence of alcohol, drugs or medication. - Page 4 SAFETY RULES – continued • Responsibility. The user is responsible for any accidents or hazards suffered by third parties or their property. • Use only hoses, fittings and couplings recommended by the manufacturer. • Do not jam the trigger in the operational position. •...
-
Page 5: Packing List
• Inflating air mattresses, balloons, etc. The Pope 2-IN-ONE POWER WASH AND VAC is designed to be used in domestic applications and should only be operated within its design limitations. Tools of this category which are designed for home and garden use should only be operated in such settings. Tools of this category are not suitable for use in public facilities, parks and sports centres, vehicle cleaning services or for any commercial type application. -
Page 6: Specifications
ASSEMBLY SPECIFICATIONS Name Pope 2-IN-ONE POWER WASH AND VAC Model Number 101HPV1800 (101HPWASH1800 & 101HPVAC1800) Rated Power – Pressure Washer 1800W AC Motor – Pressure Washer 220-240V~50Hz Operating Pressure 10 Mpa (100 bar) Maximum Pressure 15 Mpa (150 bar) Flow Rate... -
Page 7: Front Assembly
ASSEMBLY – continued Product Layout and Descriptions FRONT ASSEMBLY See Fig 1 1. Upper Handle 2. Left and Right Arm Handles 3. Accessory Shelf 4. Water Inlet 5. Water Outlet 6. Soap Bottle Switch 7. Power Switch for High Pressure Washer Fig 1 BACK ASSEMBLY... -
Page 8: Pressure Washer
ASSEMBLY – continued Assembling the Pressure Washer See Fig 3 Follow these steps to assemble the pressure washer. 1. Position the accessory bracket on the back of the pressure washer by pressing the bracket into the recesses on the arms. Screw firmly in place through the side of the arms. - Page 9 ASSEMBLY – continued Assembling the Vacuum with the Pressure Washer See Fig 7 Follow these steps to install the Vacuum Cleaner into the Pressure Washer Housing. 1. Remove vacuum cleaner from the packaging. 2. Guide the vacuum cleaner so that the slots in the side of the vacuum slide into the side of the arms.
-
Page 10: Operation
OPERATION Starting the Pressure Washer – Using the Dials See Fig 8 and Fig 9 Follow these steps to understand the dials on the pressure washer unit. 1. Two dials exist on the pressure washer unit. 2. The dial on the left dispenses the soap from the soap bottles at the back of the pressure washer unit. -
Page 11: Safety Shut-Off
OPERATION – continued Starting the Pressure Washer – Using a Garden Tap Follow these steps to operate the High Pressure Washer. Note: The pressure washer can be operated with or without the vacuum stowed on board. 1. Connect garden hose from the tap to the pressure washer. Ensure all connections are secure. 2. -
Page 12: Total Stop System
OPERATION – continued Working with the Pressure Washer 1. Always ensure the unit is standing upright and that ventilation grills are not obstructed during use. 2. Do not move the pressure washer by pulling on the electrical cord or the high pressure hose. Use the handle provided. -
Page 13: Using Detergent
OPERATION – continued USING DETERGENT See Fig 11, Fig 12 and Fig 13 Note: Use only liquid detergent recommended for the purpose. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance. Use sparingly to help conserve the environment. -
Page 14: After Use
OPERATION – continued 4. Dissolve dirt by applying detergent onto the surface of the object being cleaned. On vertical surfaces work from the bottom upwards. 5. Leave the detergent to act for a few minutes but do not allow it to dry out. 6. - Page 15 OPERATION – continued Using the Vacuum Follow these steps to operate the vacuum function. 1. To vacuum, attach the vacuum hose to the side closest to the on / off switch. 2. Switch vacuum on. 3. The vacuum function will clean dry debris such as dust as well as vacuuming up wet spills. Avoid vacuuming large or heavier objects as they may lower the performance of the unit.
-
Page 16: Maintenance
MAINTENANCE STORAGE When cleaning is finished: • Switch off the High Pressure Washer at the on/off switch on the unit. • Turn off the water supply at the tap. • Discharge residual pressure by pressing the trigger until no more water comes out of the nozzle. -
Page 17: Troubleshooting
TROUBLE SHOOTING TROUBLESHOOTING PROBLEM... -
Page 18: Warranty
You must keep your receipt as proof of purchase for return of the product under the terms of this warranty. Your Pope product is guaranteed to be free from defects in materials or workmanship for a period of 24 months from the date of purchase provided the product has been used in accordance with the manufacturer's recommendations. - Page 19 Pope is a Registered Trademark of Toro Australia Pty Ltd ® 53 Howards Rd Beverley South Australia 5009 Made in China to Pope's Specifications...
Need help?
Do you have a question about the 101HPV1800 and is the answer not in the manual?
Questions and answers