Page 1
PRO VHF WIRELESS MICROPHONE SYSTEM WR-PRO - WM-PRO - WM/T-PRO - EX-503 - EX-413 INSTRUCTION MANUAL POWER INDICATOR EARPHONE JACK POWER/FREQUENCY POWER/FREQUENCY SELECTOR SWITCH SELECTOR SWITCH OUTPUT PLUG SIGNAL INDICATOR MICROPHONE JACK SHOE MOUNT WM-PRO TRANSMITTER BATTERY COMPARTMENT WR-PRO RECEIVER...
Page 2
If it does not close easily, turn The battery around and try again. 2. Power/Frequency Selector Switch This slide switch is used to turn the unit on and off as well as to select a frequency. When not using the WR-PRO, make sure that the switch is turned to OFF.
Page 3
3. Signal Indicator This LED has 2 functions: When you first turn the Power/Frequency Selector Switch of the Receiver on, but if the Transmitter is not on, the LED will go on and off indi- cating that the battery is good. If both the Transmitter and the Receiver are on and they are on the same frequency, the Signal Indicator will remain on.
Page 4
This switch is used to turn the unit on and off as well as to select a frequency. 4. Mounting The Transmitter can be attached to a belt using the clip provided or placed in a pocket. SPECIFICATIONS WM-PRO & WM/T-PRO TRANSMITTERS WR-PRO RECEIVER TRANSMISSION FREQUENCY: F1—169.445MHz RECEPTION FREQUENCY: F1—169.445MHz F2—170.245MHz F2—170.245MHz...