Arua-10 Settings - Kenwood TS-590S Setting Manual

Usb audio function

Hide thumbs Also See for TS-590S:

Table of Contents

4.3 ARUA-10 Settings

Follow the steps below to set up the ARUA-10

Connect the TS-590S and computer using a USB cable.

To launch the software, select Start Button > Programs > Kenwood > ARUA-10.

After launching the ARUA-10, a "Task Tray" icon

and select "Device Settings" from the menu. The window shown below appears.

In this window you can specify sound devices for the transceiver's audio reception

output and modulated audio input. You can also specify which microphones and

speakers connected to the computer to use.

In the above example, the computer has recognized four types of input sound

devices.

・ Microphone (USB Audio Codec)

・ Microphone (High Definition Audio)

・ Line In (High Definition Audio)

There are two types of output sound devices.

・ Speakers (USB Audio Codec)

・ Speakers (High Definition Audio)

appears. Right click this icon

Table of Contents