Jensen VX7020 Operating Instructions Manual page 25

VX7020
Default data fields when cruising without a destination (tap and hold any of the
fields to change its value):
Field
Default data fields when navigating a route (tap and hold any of the fields to
change its value):
Field
128-9291 Jensen VX7020 Navigation Manual.indd 25
Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains
it.
Shows the current time corrected with time zone offset.
The accurate time comes from the GPS satellites, and the
time zone information comes from the map or it can be set
manually in Regional settings. (The current time is always
displayed in the top left corner of menu screens.)
Description
Shows the distance you need to travel on the route before
reaching your final destination.
Shows the time needed to reach the final destination of
the route based on information available for the remaining
segments of the route. Historical traffic data or traffic
patterns are also taken into account whenever such
information exists..
Shows the estimated arrival time at the final destination
of the route based on information available for the
remaining segments of the route. Historical traffic data or
traffic patterns are also taken into account whenever such
infromation exists.
25
3/17/2014 1:25:50 PM