Chevrolet SS Sedan 2015 Owner's Manual page 52

Do not have a seatback reclined if
the vehicle is moving.
Memory Seats
The SET, "1," "2," and 3 buttons
on the driver door are used to
manually save and recall memory
settings for the driver seat and
outside mirrors.
Storing Memory Positions
To save positions into memory for
the 1, 2, or 3 driving positions:
1. Adjust the driver seat and
outside mirrors to the desired
driving positions.
Seats and Restraints
2. Press and release SET. A beep
will sound.
3. Immediately press and hold 1
until two beeps sound.
4. Repeat Steps 1 and 2 for a
second driver using 2 and/or a
third driver using 3.
Manually Recalling Memory
Positions
If the vehicle is off or not in
P (Park), press and hold "1," "2," or
3 to manually recall the previously
stored memory positions. Releasing
"1, "2," or 3 before the stored
positions are reached stops the
recall.
If the vehicle is on and in P (Park),
press and release 1, 2, or 3 to
recall the memory positions. Turning
the vehicle off before the stored
positions are reached stops the
recall.
3-5