Chevrolet Spark EV 2015 Owner's Manual page 219

9-26 Driving and Operating
The indicator light for both systems
is in the instrument cluster. This
light will:
Flash when TCS is limiting
wheel spin.
Flash when StabiliTrak is
activated.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC),
and comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If comes on and stays on:
1. Stop the vehicle.
2. Turn the vehicle off and wait
15 seconds.
3. Start the vehicle.
Drive the vehicle. If comes on
and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.
Turning the Systems Off
and On
The button for TCS and StabiliTrak
is on the center console behind the
shift lever.
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
To turn off only TCS, press and
release the button. The traction
off light displays in the instrument
cluster, and the appropriate
message is displayed in the DIC.
See Ride Control System Messages
on page 5-33.
To turn TCS on again, press and
release the button. The traction
off light displayed in the
instrument cluster will turn off.