1. Manuals
  2. Brands
  3. overam Manuals
  4. Laptop
  5. mirage 3101
  6. User manual

overam mirage 3101 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V10.1.20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mirage 3101 and is the answer not in the manual?

Questions and answers

Related Manuals for overam mirage 3101

Summary of Contents for overam mirage 3101

  • Page 1 V10.1.20...
  • Page 3 Preface Notice The company reserves the right to revise this publication or to change its contents w ithout notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
  • Page 4 Preface R&TTE Directive This device is in compliance with the essential requirements and other relevant provisions of the R&TTE Direc- tive 1999/5/EC. This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Lux- embourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland, United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slov- enia.

  • Page 5: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and fou nd to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 6: Fcc Rf Radiation Exposure Statement

    Preface FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

  • Page 7: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 8: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer Do not place it on an unstable Do not place anything heavy...
  • Page 9 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 10: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer.  • Your AC/DC adapter may be designed for international travel but it still requires a steady, Power Safety uninterrupted power supply.

  • Page 11: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not remove any batteries from the computer while it is powered on. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 12: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate you r warranty and expose you and the computer to electric sh ock.

  • Page 13: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 14 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your si ght. In some areas, computer theft is very common.
  • Page 15 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or se rious injury from repetitive strain to your hands, wrists or other joints.

  • Page 16: Lcd Screen Care

    Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. •...

  • Page 17: Table Of Contents

    Preface Contents Notice .................I System Map: Front & Rear Views .......1-10 FCC Statement ..............III System Map: Left & Right Views .......1-11 FCC RF Radiation Exposure Statement: ......IV System Map: Bottom View ..........1-12 Instructions for Care and Operation ....... VI 3.75G/HSPA Module USIM Card Installation ....1-13 Power Safety ..............
  • Page 18 Preface Drivers & Utilities Parallel Printer .............2-13 What to Install ..............4-1 Power Management Module Driver Installation ..........4-1 Overview ................3-1 Driver Installation ............4-2 The Power Sources ............3-2 Updating/Reinstalling Individual Drivers ......4-4 AC/DC Adapter .............3-2 User Account Control ............4-4 Battery ................3-2 Windows Security Message ...........4-4 Turning On the Computer ..........3-3 New Hardware Found ............4-5 Power Plans ..............3-4...
  • Page 19 Preface BIOS Utilities Boot Menu ..............5-12 Exit Menu ..............5-13 Overview ................5-1 The Power-On Self Test (POST) ........5-2 Upgrading The Computer Failing the POST ............5-3 Overview ................6-1 Fatal Errors ..............5-3 When Not to Upgrade ............6-2 Non-Fatal Errors ............5-3 Removing the Battery ............6-3 The Setup Utility ............5-4 Upgrading the Hard Disk Drive ........6-4 Entering Setup ...............5-4...
  • Page 20 Preface Specifications Mobile Partner Application .........7-25 Profile Management .............7-25 Processor ............... C-2 Text Messaging Service ..........7-29 Core Logic ..............C-2 Display ................C-2 Troubleshooting Memory ................. C-2 Overview ................8-1 Video ................C-2 Basic Hints and Tips ............8-2 BIOS ................C-2 Backup and General Maintenance .........8-3 Storage ..

  • Page 21: Quick Start Guide

    Quick Start Guide Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...

  • Page 22: Advanced Users

    Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...

  • Page 23: Not Included

    Quick Start Guide Not Included Operating Systems (e.g. Windows 7) and applications (e.g. word processi n g, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals.  Drivers If you are installing new system software, or are re-configuring your computer for a different system, you will need to install the drivers listed in “Drivers &...

  • Page 24: System Software

    Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find that this manual refers to the Windows 7 operating system.

  • Page 25: System Startup

    Quick Start Guide System Startup Remove all packing materials, and place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.

  • Page 26: System Map: Lcd Panel Open

    Quick Start Guide System Map: LCD Panel Open Figure 1 - 2 LCD Panel Open  Built-In PC Camera (Optional) Wireless Device Operation Aboard Power Button Aircraft Keyboard The use of any portable Built-In Microphone electronic transmission de- Touchpad & vices aboard aircraft is usu- Buttons ally prohibited.

  • Page 27: Led Indicators

    Quick Start Guide LED Indicators The LED indicators display helpful information about the current status of the computer. Icon Color Description Orange DC Power is Plugged In Green The Computer is On (Power Status) Blinking Green The Computer is in Sleep Mode Orange The Battery is Charging Green...

  • Page 28: Keyboard

    Quick Start Guide Keyboard  The keyboard has a numerical keypad for easy numeric data input, and features func- Other Keyboards tion keys to allow you to change operational features instantly. See Table 1 - 2, on for full function key combination details. page 1 - 9 If your keyboard is damaged or you just...

  • Page 29: Function Keys & Visual Indicators

    Quick Start Guide Function Keys & Visual Indicators The function keys (F1 - F12 etc.) will act as hot keys when p ressed while the Fn key is held down. Make sure the hot key driver is installed (see “Hot Key” on page 4 - Keys Function/Visual Indicators Keys...

  • Page 30: System Map: Front & Rear Views

    Quick Start Guide System Map: Front & Rear Views Figure 1 - 4 Front & Rear Views LED Indicators External Monitor Port Vent/Fan Intake/ Outlet Security Lock Slot DC-In Jack  Overheating To prevent your computer from overheating make sure nothing blocks the vent(s)/fan in- take(s) while the computer is in use.

  • Page 31: System Map: Left & Right Views

    Quick Start Guide System Map: Left & Right Views Figure 1 - 5 Left & Right Views USB 2.0 Ports Microphone-In Jack Headphone-Out Jack Speakers 3-in-1 Card Reader HDMI-Out Port RJ-45 LAN Jack  3-in-1 Card Reader  The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / RS MMC Optical Device SD (Secure Digital) / Mini SD / SDHC / SDXC Compatible...

  • Page 32: System Map: Bottom View

    Quick Start Guide System Map: Bottom View Figure 1 - 6 Bottom View Battery Hard Disk Bay Cover Vent/Fan Intake/ Outlet Speakers  The CPU is not a user ser- viceable part. Opening this  compartment, or accessing the CPU in any way, may vi- Battery Information olate your warranty.

  • Page 33: 3.75G/Hspa Module Usim Card Installation

    Quick Start Guide 3.75G/HSPA Module USIM Card Installation If you have included an optional 3.75G/HSPA module in your purchase option, follow the instructions below to install the USIM card (which will be provided by your service provider), and then run the Mobile Partner ap- plication.

  • Page 34: Windows 7 Start Menu & Control Panel

    Quick Start Guide Windows 7 Start Menu & Control Panel Most of the control panels, utilities and programs within Windows 7 (and most other Windows versions) are ac- cessed from the Start menu. When you install programs and utilitie s they will be inst alled on your hard disk drive, and a shortcut w ill usually be placed in the Start menu and/or the desktop.

  • Page 35: Video Features

    Quick Start Guide Video Features You can configure display options from the Display (Control Panel) and Screen Resolution in Windows. For more detailed video information see Appendix To access Display (Control Panel) and Screen Resolution in Windows: Click Start and click Control Panel. Click Display (icon) - In the Appearance and Personalization category.
  • Page 36 Quick Start Guide To access the Intel(R) Graphics Media Accelerator Driver for mobile control panel: Click Advanced settings (Figure 1 - 9 on page 1 - 15) in the Screen Resolution control panel in Win- dows. Click the Intel(R)... tab and click Graphics Properties (button) (Figure 1 - 10 on page 1 - 16) .

  • Page 37: Power Options

    Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 14) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, computer lid (when closed), display and sleep mode from the left menu.

  • Page 38: Mofa Lcd Back Covers

    Quick Start Guide MOFA LCD Back Covers MOFA (Magic of Film Art) technology allows fashionable and unique pictorial designs to be printed on the spe- cially designed changeable LCD back covers. If your purchase option includes the sp ecially designed change- able LCD back cover option, then follow the instructions in “Changing the Optional LCD Back Covers”...

  • Page 39: Features & Components

    Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard D isk D rive • External USB Optical (CD/DVD) Device • 3-in-1 Card Reader •...

  • Page 40: Hard Disk Drive

    Features & Components Hard Disk Drive  The hard disk drive is used to store your data in the computer. The hard disk can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height Power Safety of 9.5 mm.

  • Page 41: External Usb Optical (Cd/Dvd) Device

    Features & Components External USB Optical (CD/DVD) Device  An external USB optical (CD/DVD ) device is available as an option for this com- puter. The optical device may be used as a boo t device if properly set in the BIOS USB Cables (see “Boot Menu”...

  • Page 42: Handling Cds Or Dvds

    Features & Components Handling CDs or DVDs  Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually Note the following: eject a CD (e.g.

  • Page 43: Dvd Regional Codes

    Features & Components DVD Regional Codes Go to the Control Panel and do uble-click Device Manager (Hardware and Sound), then click the + next to DVD/CD-ROM drives. Double-click on the DVD- ROM device to bring up the Properties dialog box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.

  • Page 44: 3-In-1 Card Reader

    Features & Components 3-in-1 Card Reader  The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device, and can be accessed in Card Reader Cover the same way as your hard disk (s).

  • Page 45: Touchpad And Buttons/Mouse

    Features & Components Touchpad and Buttons/Mouse  The Touchpad is an alternative to the mouse; however, you can also add a mouse to Touchpad Scrolling your computer th rough one of the USB ports. The Touchpad buttons fun ction in much the same way as a two-button mouse.

  • Page 46: Gestures And Device Settings

    Features & Components Gestures and Device Settings  The Synaptics Gestures Suite application allows you to use a specific gesture (ac- tion) on the surface of the Touchpad to perform specific actions to manipulate doc- Show Video uments, objects and applications. You can get a clearer view of the gestures in- You can configure the settings from the Device Settings tab in Mouse Properties:...
  • Page 47 Features & Components Scrolling The Two-Finger scrolling feature works in most scrollable windows and allows you to scroll horizontally and ve rtically. Pl ace two fingers, slightly separated, on the Touchpad surface and slide both fingers in the direction required (in a straight con- Figure 2 - 5 tinuous motion).
  • Page 48 Features & Components Rotating Use the Pivot Rotate gesture to rotate objects (e.g. photos) in 90 degree increments. Place a finger down on the left “target” zone and keep it stationary. Place another finger near the middle of the Touchpad and slide it in a circular motion around the stationary finger (clockwise or counterclockwise) to rotate the object.

  • Page 49: Audio Features

    Features & Components Audio Features  You can configure the audio options on your computer from the Sound control Sound Volume panel in Windows, or from the Realtek HD Audio Manager icon in the taskbar/ Adjustment control panel (right-click the taskbar icon to bring up an audio menu).

  • Page 50: Optimizing Audio Recording

    Features & Components Optimizing Audio Recording Follow these instructions to optimize your audio recording. Double-click the taskbar icon to bring up the Realtek HD Audio Manager. Click the Microphone tab. Click the Noise Suppression button to prevent any background noise or feedback.

  • Page 51: Adding A Printer

    Features & Components Adding a Printer  The most commonly used peripheral is a pr inter. The f ollowing conventions will help you to add a printer; however it is always best to refer to the printer manual for Parallel Printer specific instructions and configuration options.
  • Page 52 Features & Components 2 - 14...

  • Page 53: Power Management

    Power Management Chapter 3: Power Management  Overview OS Note To conserve power, especially when usi ng the battery, your computer power man- Power management functions will vary slight- agement conserves power by con trolling individual components o f the computer ly depending on your (the monitor and hard disk drive) or the whole system.

  • Page 54: The Power Sources

    Power Management The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/ DC adapter will damage the computer and its components. Attach the AC/DC adapter to the DC-in jack at the rear of the computer.

  • Page 55: Turning On The Computer

    Power Management Turning On the Computer  Now you are ready to begin using your computer. To turn it on simply press the pow- er button on the front panel. Forced Off When the computer is on, you can use the power bu tton as a Stand by/Hibernate/ If the system “hangs”, and the Ctrl + Alt + Del Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and...

  • Page 56: Power Plans

    Power Management Power Plans  The computer can be configured to conserve power by means of power plans. You can use (or modify) an existing power plan, or create a new one. Resuming Operation The settings may be adjusted to set the display to turn off after a specified time, and Table 3 - 1, on to send the computer into Sleep after a period of inactivity.
  • Page 57 Power Management Each Windows power plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose High performance (you may need to click Show additional plans to view the High performance plan) for maximum performance when the computer is pow- ered from an AC power source.

  • Page 58: Power-Saving States

    Power Management Power-Saving States You can use power-saving states to stop the computer’s operation and restart where you left off. Win 7 uses the Sleep, Hibernate and Shut Down power-saving states. Sleep In Sleep all of your work, settings and preferences are saved to memory before the system sleeps.

  • Page 59: Hibernate

    Power Management Hibernate Hibernate uses the least amount of power of all the power-saving states and saves all of your information on a part of the hard disk before it turns the system off. If a power failure occurs the system can restore your work from the hard disk; if a power failure occurs when work is saved only to memory, then the work will be lost.

  • Page 60: Configuring The Power Buttons

    Power Management Configuring the Power Buttons  The power/sleep button (Fn + F4 key combo) and closed lid may be set to send the computer in to a power-saving state. Click Choose what the power buttons do on Password Protection the left menu in Power Options to bring up the menu.

  • Page 61: Resuming Operation

    Power Management Resuming Operation  You can resume operation from power-saving states by pressing the power button, or in some cases pressing the sleep button (Fn + F4 key combo). Closing the Lid If you have chosen to Power Status To Resume Icon Color...

  • Page 62: Energy Star Power Saving

    Power Management Energy Star Power Saving  This system supports Energy Star power management features that place comput- ers (CPU, hard drive, etc.) into a low-power sleep modes after a designate d period Taskbar Icon of inactivity. If you want to enable Energy Star power saving then follow these in- structions: If the taskbar icon does not appear then click the...

  • Page 63: Battery Information

    Power Management Battery Information  Follow these simple guidelines to get the best use out of your battery. Low Battery Battery Power Warning Your computer’s battery power is dependent upon many factors, including the pro- When the battery is criti- grams you are running, and peripheral devices attach ed.

  • Page 64: Conserving Battery Power

    Power Management Conserving Battery Power  • Use a power plan that conserves power (e.g Power saver), however note that this may have an affect on computer performance. Wireless Hot Keys • Lower the brightness level of the LCD display. The system will decrease LCD The computer’s wireless brightness slightly to save power when it is not powered by the AC/DC adapter.

  • Page 65: Battery Life

    Power Management Battery Life Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to re- move the battery for any reason (e.g.

  • Page 66: Proper Handling Of The Battery Pack

    Power Management Proper handling of the Battery Pack  • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode Caution • DO NOT connect the metal terminals (+, -) to each other Danger of explosion if battery is incorrectly re- placed.

  • Page 67: Battery Faq

    Power Management Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 68 Power Management Click Change plan settings (after creating it) and click Change plan settings > Change advanced power settings. Figure 3 - 9 Change Plan Settings / Change Advanced Power Settings 3 - 16 Battery Information...
  • Page 69 Power Management Scroll down to Battery and click + to expand the battery options. Choose the options below (click Yes if a warning appears): Figure 3 - 10 Power Options Advanced Settings - Battery • Low battery levels = 0% •...
  • Page 70 Power Management How do I fully charge the battery? When charging the battery, don’t stop until the LED charging indicator light changes from orange to green. How do I maintain the battery? Completely discharge and charge the batte ry at least once every 30 days or after about 20 partial discharges.

  • Page 71: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities This chapter deals with installing the drivers and utili- What to Install ties essential to the operation or improvement of some You will need to attach a DVD drive to the computer of the compu ter’s subsyste ms.

  • Page 72: Driver Installation

    Drivers & Utilities Driver Installation Check the driver installation order from Table 4 - 1, on page 4 - 3 (the drivers must be installed in Insert the Device Drivers & Utilities + User’s Manual this order) which is the same as that listed in the disc into an attached DVD drive and click Install Driv- Drivers Installer menu below.
  • Page 73 Drivers & Utilities Manual Driver Installation Click Browse CD/DVD (button) in the Drivers Install- Driver - Windows 7 Page # er application and browse to the executable file in the Chipset Page 4 - 5 appropriate driver folder. Video Page 4 - 5 Windows Update Page 4 - 5 After installing all the drivers make sure you enab le...

  • Page 74: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Updating/Reinstalling Individual Drivers User Account Control If you wish to upd ate/reinstall in dividual drivers it If a User Account Control prompt appears as part of may be necessary to uninstall the original driver.To do the driver instal lation procedure, click Continue or this go to the Control Panel in the Windows OS and Allow, and follow the installation procedure as direct- double-click the Programs and Features icon ( Pro-...

  • Page 75: New Hardware Found

    Drivers & Utilities New Hardware Found Driver Installation Procedure If you see the message “New Hardware Found” dur- Insert the Device Drivers & Utilities + User’s Manual ing the installation procedure (other than when out- disc into your attached CD/DVD d rive and click In- lined in the driver install procedure), click Cancel stall Drivers (button).

  • Page 76: Cardreader

    Drivers & Utilities CardReader Intel MEI Driver 1. Click 4.Install CardReader Driver > Yes. 1. Click 7.Install MEI Driver > Yes. 2. Click Install > Finish. 2. Click Next > Yes > Next > Next. 3. Click Finish to restart the computer. Touchpad 1.

  • Page 77: Windows Experience Index

    Drivers & Utilities Windows Experience Index After the drivers are installed follow this procedure to  ensure an accurate rating from the Windows Experi- Windows 7 Update ence Index: After installing all the drivers make sure you enable Win- dows Update in order to get all the latest security up- 1.

  • Page 78: Optional Drivers

    Drivers & Utilities Optional Drivers Bluetooth Module See the pages indicated for the driver installation pro- Note: The operating system is the default setting for cedures for any modules included in your purchase op- Bluetooth control in Windows Vista, and does not re- quire a driver.

  • Page 79: Bios Utilities

    BIOS Utilities Chapter 5: BIOS Utilities  Overview BIOS Screens This chapter gives a brief introduction to the computer’s built-in software: Note that BIOS screens pictured these pages are intend- Diagnostics: The POST (Power-On Self Test) ed for guidance in set- ting up your system’s Configuration: The Phoenix Setup utility BIOS.

  • Page 80: The Power-On Self Test (Post)

    BIOS Utilities The Power-On Self Test (POST)  Each time y ou turn on the comp uter, the system takes a few secon ds to conduct a POST, including a quick test of the on-board RAM (memory). POST Screen As the POST proceeds, the computer w ill tell you if there is anything wrong. If there 1.BIOS information 2.CPU type is a problem that prevents the system from booting, it will display a system summary...

  • Page 81: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non- fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the comp uter to your service representative or authorized service center as soon as possible.

  • Page 82: The Setup Utility

    BIOS Utilities The Setup Utility  The Phoenix Setup Utility tells the system how to configure itself and manage basic features and subsystems (e.g. port configuration). BIOS Settings Warning Entering Setup Incorrect settings can To enter Setup, turn on the computer a nd press F2 during the POST. The promp t cause your system to malfunction.

  • Page 83: Setup Screens

    BIOS Utilities Setup Screens  The following pages contain additional advice on portions of the Setup. Setup Menus Along the top o f the screen is a menu bar with menu h eadings. When you select a heading, a new screen appears. Scroll through the features listed on each screen to Setup menus shown in this section are...

  • Page 84: Main Menu

    BIOS Utilities Main Menu Figure 5 - 2 Main Menu System Time & Date (Main Menu) The hour setting uses the 24-hour system (i.e., ØØ = midnight; 13 = 1 pm). If you can change the date and time settin gs in your operating system, you will also change these settings.

  • Page 85: Sata Aggress Link Power (Advanced Menu)

    BIOS Utilities SATA Aggress Link Power (Advanced Menu) This item is only available if AHCI is set as the SATA Mode. Aggressive Link Pow- er Management (ALPM) allows the SATA AHCI controller to put the link to the disk into a very low power mode when the IO is not being used. The controller au- tomatically puts the link back into an active power mode when required.

  • Page 86: Advanced Menu

    BIOS Utilities Advanced Menu Figure 5 - 3 Advanced Menu Legacy USB Support (Advanced Menu) Choose “Enabled” if you intend to use USB devices in systems which do not nor- mally support USB functionality (e.g. DOS). The default setting is “Enabled” and does not need to be changed if you intend to use your USB devices in Windows.

  • Page 87: Boot-Time Diagnostic Screen (Advanced Menu)

    BIOS Utilities Boot-time Diagnostic Screen (Advanced Menu) Use th is menu item to enable/disable the Boo t-time Diagnostic Screen or POST screen (see “The Power-On Self Test (POST)” on page 5 - Legacy OS Boot (Advanced Menu) If “Enabled” the syst em will attempt to load the Lega cy OS (e.g. Vista/Windows XP) first.

  • Page 88: Security Menu

    BIOS Utilities Security Menu  Security Menu changes make here affect the access to the Setup utility itself, and also access to your ma- chine as it boots up af- ter you turn it on. These settings do not affect your machine or network passwords which will be set in...

  • Page 89: Set User Password (Security Menu)

    BIOS Utilities Set User Password (Security Menu) You can set a password for user mode access to the Phoenix SecureCore Setup  Utility. This will not affect access to the computer OS, (only the Setup utility) unless Password Warning you choose to set a Password on Boot (see below). Many menu items in the Phoenix SecureCore Setup Utility cannot be modified in user mode.

  • Page 90: Boot Menu

    BIOS Utilities Boot Menu  BIOS Screens Note that BIOS screens pictured these pages are intend- ed for guidance in set- ting up your system’s BIOS. BIOS versions are sub- ject to constant change and revision, therefore your computer’s actual screens appear slightly different from...

  • Page 91: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 6 Exit Menu Choosing to Discard Changes, or Exit Discarding Changes, will wipe out any changes you have made to the Setup. You can also choose to restore the original Set- up defaults that will return the Setup to its original state, a nd erase any previous changes you have made in a previous session.
  • Page 92 BIOS Utilities 5 - 14...

  • Page 93: Upgrading The Computer

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview  This chapter contains information on upgrading the computer. Follow the steps out- lined to make the desired upgrades. If you have any trouble or problems you can con- Warranty Warning tact your service representative for further help.

  • Page 94: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade  These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake upgrade proce- • Your system is still under warranty or a service contract dures, make sure that •...

  • Page 95: Removing The Battery

    Upgrading The Computer Removing the Battery  If you are confident in undertaking upgrade procedures yourself, for safety reasons it is best to remove the battery. Warranty Warning Turn off the computer, and turn it over. Please check with your Slide the latch in the direction of the arrow (or latches &...

  • Page 96: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive  The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm (h) (see 2). Follow your HDD System “Storage” on page C - Warning operating system’s installation instructions, and install all necessary drivers and util- ities (see...
  • Page 97 Upgrading The Computer Grip the tab and slide the hard disk in the direction of the arrow Lift the hard disk up in the direction of arrow  Remove screws and then remove the cover tab. Reverse the process to install a new hard disk drive. Hard Disk Screws &...

  • Page 98: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 204 pin Small Outline Dual In-line (SO- DIMM) DDRIII (DDR3) type memory modules (see “Memory” on page C - 2 details of supported module types). The total memory size is automatically detected by the POST routine once you turn on your computer.
  • Page 99 Upgrading The Computer Press the four keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this). Figure 6 - 5 Keyboard Latches Carefully lift the keyboard up, being careful not to bend the keyboard cable Figure 6 - 6 Keyboard Release Upgrading the System Memory (RAM) 6 - 7...
  • Page 100 Upgrading The Computer Carefully move aside the WLAN module cable from the right RAM slot, and gently pull the two release latches on the sides of the memory socket to release the memory module(s). Figure 6 - 7 WLAN Cable ...
  • Page 101 Upgrading The Computer The RAM module will pop-up, and you can remove it. Figure 6 - 9 RAM Module Removal 7 10  Contact Warning Be careful not to touch the metal pins on the module’s connecting Pull the latches to release the second module if necessary. edge.

  • Page 102: Changing The Optional Lcd Back Covers

    Upgrading The Computer Changing the Optional LCD Back Covers  If your purchase option includes the specially designed LCD back cov er option, then follow the instructions below to change the covers (note these covers are not appli- Rubber Screw Covers cable to all models in this series - consult your service center for details).
  • Page 103 Upgrading The Computer Carefully slide the cover forward in the direction of the arrows & illustrated below Figure 6 - 11 Slide the Cover Forward Remove the LCD back cover Figure 6 - 12 Remove the LCD Back Cover Changing the Optional LCD Back Covers 6 - 11...
  • Page 104 Upgrading The Computer Align the replacement cover with the dotted line as illustrated below (and as marked on the cover). Figure 6 - 13 Replacing the LCD Back Cover Slide the cover forward until it clicks firmly into place Run your hands around the sides and front of the cover to make sure it is firmly aligned in place (carefully press down to make sure the fit is secure).

  • Page 105: Modules & Options

    Modules & Options Chapter 7: Modules & Options  Overview Driver Installation & Module Power This chapter contains information on the following modules, which may come with your computer, depending on the configuration purchased. If you are unsure please Make sure any modules contact your service representative.

  • Page 106: Bluetooth Module

    Modules & Options Bluetooth Module  The operating system’s Bluetooth Devices control panel is used to configur e the Wireless Device Bluetooth settings in Windows, and therefore does not require a driver. Use the Fn Operation Aboard + F12 key combination (see “Function Keys &...

  • Page 107: Bluetooth Configuration In Windows 7

    Modules & Options Bluetooth Configuration in Windows 7  Setup your Bluetooth Device so the Computer Can Find it Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Add a Device Make the device discoverable (to do this check your device documentation). Click Start, and click To Turn the Bluetooth Module On Control Panel and then...
  • Page 108 Modules & Options To Add a Bluetooth Device  Access the Bluetooth Devices control panel and click Add a device. Double-click the device you want to pair with the computer. Pairing Options If a device has been pre- viously connected then the pairing option menu will appear when you at- tempt subsequent con-...
  • Page 109 Modules & Options Enter the code into your Bluetooth enabled device and follow any on-screen instructions to complete the pairing.  Figure 7 - 3 Pairing Codes Pairing Code Example The example outlined here shows a connection to a mobile device. Other devices e.g. computers, may have a slightly different connection proce- dure, and may require you to confirm a pairing code is correct on both devices.
  • Page 110 Modules & Options To Change Settings for the Bluetooth Device  Click the taskbar icon and select Show Bluetooth Devices. Right-click on the device you want to change and click Properties to: Bluetooth Help • Change the name of the device (click Bluetooth, type a new name and click OK). •...

  • Page 111: Wireless Lan Module

    Modules & Options Wireless LAN Module  If you have included an Intel® Wi-Fi Link 1000 Series (802.11 b/g/n) or 3rd Party 802.11b/g/n WLAN module in your purchase option, mak e sure that the Wireless Wireless Device Operation Aboard LAN module is on before installing the driver. Aircraft Use the Fn + F11 key combination (see “Function Keys &...

  • Page 112: Intel® Wi-Fi Link Series Driver Installation

    Modules & Options Intel® Wi-Fi Link Series Driver Installation  If you see the message “Found New Hardware” click Cancel to close the window. 1. Make sure the module is powered on, then insert the Device Drivers & Util- Intel(R) PROSet/ ities + User’s Manual disc into the CD/DVD drive.

  • Page 113: Connecting To A Wireless Network

    Modules & Options Connecting to a Wireless Network  Make sure the Wireless LAN module is turned on. Click the taskbar wireless icon , and then double-click an access point to con- Network and nect to or click to Open Network and Sharing Center if you do not see a network Sharing Center you want to connect to in the taskbar menu (a list of options will appear allowing You can also use the Net-...
  • Page 114 Modules & Options You may need to enter a security key for any access point to which you are trying to connect. Click to select a network location (e.g. Home, Work or Public). Click “View or change settings in Network and Sharing Center” to access further options for the connection.
  • Page 115 Modules & Options Click the taskbar icon to see any currently connected networks.  To disconnect from the wireless network you can click the taskbar wireless icon , click the active connection and then click Disconnect (button). Security Enabled Networks You should try to make sure that any network you are connecting to is a se-...

  • Page 116: Windows Mobility Center

    Modules & Options Windows Mobility Center  The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. Wireless Hot Keys To access the Windows Mobility Center: The computer’s wireless function keys will not func- Click Start, and click Control Panel (or point to Settings and click Control...

  • Page 117: Pc Camera Module

    Modules & Options PC Camera Module  The PC Camera application captures video files and takes pictures. Before installing the driver, make sure that the optional PC Camera is on. Use the Fn + F10 key com- Latest PC Camera Driver Information bination (see 8) to toggle power to the...

  • Page 118: Pc Camera Driver Installation

    Modules & Options PC Camera Driver Installation  1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. PC Camera Screen 2. Click Option Drivers (button). Refresh 3.
  • Page 119 Modules & Options PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click Sound (Hardware and Sound).
  • Page 120 Modules & Options Camera Application The camera application is a video viewer for general purpose video viewing and test-  ing, and for capturing video files to .avi format. Pre-Allocating File Size/Space Run the camera application from the desktop shortcut (it is recommended that you set the capture file before the capture process - see “Set Capture File”...
  • Page 121 Modules & Options Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the har d disk, and select Properties).
  • Page 122 Modules & Options Eliminating Screen Flicker If you find that the video screen in the camera program is flickering, you can try to  adjust the setting in the Video Capture Filter options. Latest PC Camera Driver Information Run the camera application from the desktop shortcut. Go to Options and scroll down to select Video Capture Filter..
  • Page 123 Modules & Options Zoom The WebCam program allows you to zoom the camera in and out (note the zoom function is not available in all camera model applications). Run the camera application from the desktop shortcut. Go to Zoom and select Zoom Out/Zoom In. Figure 7 - 11 Zoom/Setting ...

  • Page 124: 3.75G/Hspa Module

    Modules & Options 3.75G/HSPA Module  If you have included an optional 3.75G/HSPA (High Speed Packet Access) module (see for specification details) in your purchase op- 3.75G/HSPA “Communication” on page C - 3 tion, you will have the appropriate software provided for your module. Follow the Modules &...
  • Page 125 Modules & Options USIM Card Installation  Turn off the computer, and turn it over. Slide the latch in the direction of the arrow (or latches & in the direction Power Safety of the arrow if you are using for 62.16WH battery). Warning Slide the latch in the direction of the arrow, and hold it in place.
  • Page 126 Modules & Options Insert the USIM card as illustrated below until it clicks fully into position. Figure 7 - 13 SIM Card Insertion  USIM Card Orientation Note that the USIM card’s readable side (with the gold-colored contacts) should face upwards as il- lustrated.
  • Page 127 Modules & Options Before installing the application, make sure that the 3.75G/HSPA module is ON (installing the driver with the module off wi ll not allow the software to det ect the module hardware correctly). Use the Fn + key combination (see Table 1 - 2, on 9) to toggle power to t he 3.75G/HSPA module.

  • Page 128: Mobile Partner

    Modules & Options Mobile Partner  With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the Mobile Partner application. The Mobile Partner Wireless Device application allows you to directly access your HSPA internet service from the com- Operation Aboard puter.

  • Page 129: Mobile Partner Application

    Modules & Options Mobile Partner Application  You will need to contact your service provider to obtain the exact details of how ex- actly to configure the settings on this page. Mobile Partner Help Profile Management To get help on Mobile Partner configuration Power on the 3.75G/HSPA module using the Fn +...
  • Page 130 Modules & Options Connecting to the Service Provider Power on the 3.75G/HSPA module using the Fn + key combination. Access the Mobile Partner application from the Start menu (Start > Programs/ All Programs > Mobile Partner), or by double-clicking the Mobile Partner icon on the desktop The software will run and you can select the Profile Name from the menu.
  • Page 131 Modules & Options When the connection is successful you can move the cursor over the network icon in the taskbar to display the connection information. Figure 7 - 17 Connected Taskbar Notification You can then access the internet, download e-mail etc. as per any internet connection.
  • Page 132 Modules & Options 11. The module will still be on, and you will need to press the Fn + key combination to turn it off. 12. If you click the Mobile Partner close icon a message will be displayed asking you to click OK to confirm the program exit and to terminate the connection.

  • Page 133: Text Messaging Service

    Modules & Options Text Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the Mobile Partner program, if your service supports SMS. Reading SMS Messages An icon will blink at the bottom of the Mobile Partner interface to notify you of any new messages received.
  • Page 134 Modules & Options 7 - 30...

  • Page 135: Troubleshooting

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 136: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 137: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.

  • Page 138: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.

  • Page 139: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 140 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 141: Problems And Possible Solutions

    Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t Battery missing / incorrectly installed. Check the battery bay, make sure the work. battery is present and seated properly (the design of the battery only allows it to go in one way).
  • Page 142 Troubleshooting Problem Possible Cause - Solution The computer feels too hot. Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating”...
  • Page 143 Troubleshooting Problem Possible Cause - Solution You forget the boot password. If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help.  Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 144 Troubleshooting Problem Possible Cause - Solution The system freezes or the screen goes The system’s power saving features have timed-out. Use the AC/DC adapter, dark. press the sleep (Fn + F4) key combination, or press the power button if no LEDs are lit.
  • Page 145 Troubleshooting Problem Possible Cause - Solution The Wireless LAN indicators The WLAN module is turned off in the Windows Mobility Center. The show that the WLAN module is powered computer’s wireless function keys will not function properly if Wireless is turned on, however the module does not connect.

  • Page 146: Bluetooth Connection Problems

    Troubleshooting Bluetooth Connection Problems If you are experiencing problems connecting to some Bluetooth devices (in particular certain mobile phones and headsets) it maybe necessary to download and install the Windows Mobile Device Center software (for Win- dows Vista and Windows 7). Go to the M icrosoft website and search for the Microsoft Windows Device Center Driver for Windows Vista (64-bit or 32-bit) and Windows 7 (64-bit or 32-bit), and then download the driver.
  • Page 147 Troubleshooting Right-click Bluetooth Peripheral Device and click on Update Driver Software. Click Browse my computer for driver software. Click Let Me pick from a list of device drivers on my computer. Figure 8 - 2 - Browse my computer.../Let me pick from... Select Bluetooth Radios from the list.
  • Page 148 Troubleshooting 10. A list of drivers will appear with Manufacturer on one side and Model in the other. 11. Choose Microsoft Corporation (make sure you choose the full name Microsoft Corporation and do not choose Microsoft - Note that you must have installed the Microsoft Windows Device Center Driver for Microsoft Corporation to appear in the list).
  • Page 149 Troubleshooting 15. The Device Manager should now display the Windows Mobile-based device support under Bluetooth Radios. 16. You will need to repeat the process for any other Bluetooth Peripheral Devices listed under Other Devices. Figure 8 - 5 - Device Manager - Bluetooth Radio Bluetooth Connection Problems 8 - 15...
  • Page 150 Troubleshooting 8 - 16...

  • Page 151: Interface (Ports & Jacks)

    Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Item Description Card Reader Port The card reader allows you to use some of the latest digital storage cards.
  • Page 152 Interface (Ports & Jacks) Item Description Headphone-Out Jack Headphones or speakers may be connected through this jack. Note: Set your system’s volume to a reduced level before connecting to this jack. Microphone-In Jack Plug an external microphone in to this jack to record on your computer. RJ-45 LAN Jack This port supports LAN (Network) functions.

  • Page 153: Intel Video Driver Controls

    Appendix B: Intel Video Driver Controls  The basi c sett ings for configuring the LCD are outli ned in “Video Features” on DVMT Notes page 1 - DVMT is not local video Intel Video Driver Installation memory. Make sure you install all the drivers in the order indicated in Table 4 - 1, on page 4 - DVMT is not user-con- figurable.

  • Page 154: Intel® Graphics & Media Control Panel

    Intel Graphics & Media Control Panel ® Advanced v ideo co nfiguration options are provided by the Intel Graphics and ® Media Control Panel. To access the control panel: Click Advanced settings in the Screen Resolution control panel in Windows. Click the Intel(R)...
  • Page 155 You may make changes to any of the graphics properties by clicking the appropriate menu tab on the left of the menu and adjusting the settings on the right.  Options & Support Click Options & Sup- port and select an item from the sub-menu to bring up the help and support topics.

  • Page 156: Display Devices & Options

    Display Devices & Options  Besides the built-in LCD you can also use an external monitor/flat panel display/TV connected to the external monitor port or to the HDMI-Out port (High-Definition Function Key Multimedia Interface) as your display device. The table below outlines the display Combination options.

  • Page 157: Attaching Other Displays

    Attaching Other Displays  If you prefer to use a monitor or flat panel display, connect it to the external monitor port or HDMI-Out port on the right of the computer. Multiple Display At least one other dis- To Clone Displays: play must be attached in Attach your display to the external monitor port or HDMI-Out port, and turn it on.
  • Page 158 To Enable Extended Desktop:  Attach your display to the external monitor port or HDMI-Out port, and turn it on. Go to the Intel(R) G&M control panel and click Display > Multiple Displays. Display Settings Click Operating Mode and select Extended Desktop from the menu. Extended Desktop Click Apply, and OK to confirm the settings change.

  • Page 159: Configuring An External Display In Windows 7

    Configuring an External Display in Windows 7  You can also use the Screen Resolution control panel in Windows 7 to configure an Function Key external display. Combination Attach your display to the external monitor port or HDMI-Out port, and turn it on. You can use the Fn + Go to the Screen resolution control panel (see “Video Features - Win 7”...
  • Page 160 You can configure the displays from the Multiple Displays menu. Figure B - 6 Screen Resolution Multiple Display Options (Win 7) • Duplicate these displays - Shows an exact copy of the main display desktop on the other display(s). • Extend these displays - Treats both connected displays as separate devices. •...
  • Page 161 Using the Windows Logo Key + P Key Combination to Switch Displays You can also use the + P key combination to quickly change display configura- tion and modes (this is particularly useful when attaching a projector) in Windows 7. Attach your display to the external monitor port or HDMI-Out port, and turn it on.

  • Page 162: Hdmi Audio Configuration

    HDMI Audio Configuration HDMI (High-Definition Multimedia Interface) carries both audio and video signals and you will can configure the audio output as per the instructions below when an HDMI enabled device is connected to the HDMI-Out port. Windows Audio Setup for HDMI Connect a device with HDMI support to the HDMI-Out port.
  • Page 163 Adjust the HDMI settings from the control panel tabs. Click OK to close the Sound control panel. Figure B - 9 HDMI Device Properties HDMI Audio Configuration B - 11...
  • Page 164 HDMI Notes  • Connect a device with HDMI support to the HDMI-Out port BEFORE attempt- ing to play audio/video sources through the device. Other Applications If you are using a third HDMI Video Configuration party application Connect an HDMI cable from the HDMI-Out port to your external display. play DVDs etc.

  • Page 165: Specifications

    Specifications Appendix C: Specifications  Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, updated or delayed due to the manufacturer's release schedule. Check with your service center for details.

  • Page 166: Processor

    Specifications Processor Memory Storage Intel® Core™ i3-330UM Processor: Dual Channel DDR3 One Changeable 2.5", 9.5 mm (h) HDD with SATA (Serial) Interface (1.20GHz) Two 204 Pin SO-DIMM Sockets Supporting DDRIII (DDR3) *1066MHz/ 32nm (32 Nanometer) Process External Super Multi/Blu-ray Optical 1333MHz Technology, 3MB L3 Cache &...

  • Page 167: Interface

    Specifications Interface Communication Power Management Three USB 2.0 Ports 10/100/1000Mb Base-TX Ethernet LAN Supports Wake on LAN One HDMI-Out Port (High-Definition Supports Wake on USB Intel® WiFi Link 1000 Series (802.11b/g/ Multimedia Interface) Energy Star 5.0 Compliant n) Wireless LAN PCIe interface Half Mini- One External Monitor Port Card Module (Factory Option) Power...

  • Page 168: Environmental Spec

    Specifications Design Feature Magic Of Film Art II Changeable LCD Back Covers (For Model B Computers) Environmental Spec Temperature ° ° Operating: C - 35 Non-Operating: -20°C - 60°C Relative Humidity Operating: 20% - 80% Non-Operating: 10% - 90% Dimensions & Weight Model A: 330mm (w) * 221mm (d) * 25.5mm (h), 1.55 kg...

Table of Contents