Mounting Your Device - Garmin nuvi 2575R Quick Start Manual

2. Fit the bottom of your device into
the mount.
3. Tilt your device back until it snaps
into place.
After the device has been connected
to vehicle power, the following
occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of the
bars is green, your device has
acquired satellite signals.
• NOTE: The device may need a
clear view of the sky to acquire
satellite signals.
• The device charges as you drive.
in the status bar indicates the
status of the internal battery.
4

Mounting Your Device

NOTICE
Before mounting the device, see
the Important Safety and Product
Information guide for information
about laws pertaining to windshield
mounting.
1. Remove the clear plastic from the
suction cup.
2. Clean and dry your windshield
and the suction cup with a lint-free
cloth.
3. Press the suction cup to the
windshield.
4. While pressing, flip the lever back
toward the windshield.
5. Snap the mount onto the
➊
suction cup arm .
➋
nüvi 2575R Quick Start Manual