Advertisement
6. Troubleshooting
PROBLEM
Standby indicator isn't working,
no wind; no mist.
Water-short indicator on;
no wind; no mist
Mist with abnormal smell
Mist generation abnormal
Abnormal noise
Water not used
WARNING!
Should up mentioned solutions do not work please contact the manufacturer or agent. Do never arbitrarily
disassemble, repair or restructure the apparatus. If there are some differences between the pictures showed
in the instruction manuals and the real products, please refer to the real products. Excuse us that we can't
inform you if there are changes to the specifications of the products. ZHANGZHOU WANLIDA PHOTO-
CATALYSIS SCIENCE - TECHNOLOGY CO.LTD owns the right of final explanation.
Distributer:
TES Scandinavia AB
Krokslätts Fabriker 30
431 37 Mölndal - Sweden
Tel. +46 (0)31-761 36 10
Fax. +46 (0)31-87 34 00
www.tesscandinavia.se
info@tesscandinavia.se
CAUSE
Power not connected
Short of water
New appliance /
Dirty water
The transducer begrimed
Dirty water or the water left too
long
Too much water in the gutter
Resonate between the appliance
and the layer
The dirty cover of the tank or
the tank not put properly
SOLUTION
Connect the power plug
Fill with water in the tank
Open the tank and put the mouth
of the tank in shade for 12 hours
Clean the tank and replace with
clean water
Clean the transducer
Clean the tank and replace with
clean water.
Reduce some water and re-fix
the cover of tank
Put the appliance on a firm layer
Clean the cover and put the tank
on right place
Advertisement
