Scart Out; Frame Rate; Audio; Digital Audio - Hyundai AH-3110 Manual

Operation
Setup
7.2

5) SCART OUT

You can change the Scart video output mode. Press
options below and press .
CVBS Video out signal from TV, AUX scart will be composite.
Y/C Video out signal from TV, AUX scart will be Y, C.

6) FRAME RATE

You can change the video type. Press
Auto When your TV is compatible with NTSC/PAL dual mode.
PAL When your TV is only for PAL reception. Regardless of the satellite signal, it
will display in PAL format. The resolution can change 1080i / 720p / 576P/576i
NTSC When your TV is only for NTSC reception. Regardless of the satellite signal, it will
display in NTSC format. The resolution can change 1080i / 720p / 480p/480i
Note : If the satellite signal and your TV type are mismatched, the TV picture may be
distorted. Even in this case, MENU will be displayed as normal. (e.g. When you
receive PAL satellite signal with NTSC TV type setting or vice versa)
24 Operation
/ buttons to select between
CH
CH
/ buttons to select and Press
CH
CH
Setup
7.2

2. AUDIO

MENU >SETUP>AUDIO

1) DIGITAL AUDIO

You can enable Dolby Digital Audio. Press
button.
DOLBY DIGITAL Dolby digital (AC-3) output enable
PCM Dolby digital (AC-3) output disable

2) MODE

You can set up Analog Audio. Press /
CH
AUDIO LEFT Analog audio output is only mono left
AUDIO RIGHT Analog audio output is only mono right
STEREO Analog audio output is only stereo mode
Operation
/ buttons to select and press
CH
CH
buttons to select and press button.
CH
Operation 25