Mercedes-Benz CL Class Coupe Quick Tips page 13

SEATS
S
EATS
E
3
D
G
2
B
1
A
H
M
2 1
B
Power front seats
Switches located in doors
A = Seat: fore/aft
B = Seat height
C = Seat angle
D = Backrest angle
E = Head restraint height
F = Seat cushion depth in/out
G = Memory position buttons
H = Memory store button
Warnings: Seat belts should be
worn at all times; children should
be secured in child restraints
properly installed in accordance
with manufacturer's instructions
Air bags are supplemental and
do not replace seat belt usage
+
–
2
+
–
1
PULSE
Always check the Operator's Manual for more operating information and safety features
SEATS
Memory System
Switches located in doors
Driver's seat: Three settings for
seat/head restraint/steering wheel/
C
exterior mirrors/rearview mirror
F
can be stored in memory
A
Front passenger's seat: Three settings
for seat and head restraint can be stored
C
Warning: Adjusting seat and
steering wheel while driving could
result in loss of vehicle control
To store settings: Adjust all storable
items, press button (H), release,
within 3 seconds press desired
position switch (G)
To recall settings: Press desired
position switch (G) and hold until
all movement stops
Releasing button before movement
stops will stop seat movement
Warning: All front seat occupants
should be as far back as possible
consistent with proper vehicle
operation
Dynamic multicontour backrest*
Switches located on outboard side
of front seat cushions
3
Seats have built-in air cushions that
can be inflated/deflated by region
To adjust position of lumbar and spinal
curve: Press desired cushion switches (1)
4
To adjust center section press cushion
switches (2)
Heated/ventilated seats
1. Front left/right seat heater
To heat quickly: Press
(two lights on), press again until
desired heating level is reached
To turn off: Press (1) until all lights
are off or automatically shuts off
in approximately 30 minutes
2. Active ventilated seats*
To operate: Press once for
highest ventilation level (3 blue
lights on)
Press twice for middle
ventilation level (2 blue lights on)
Press 3 times for lowest
ventilation level (1 blue light on)
To turn off: Press until all
lights are off
Lumbar support
Switches located
on outboard side
1
of front seat
cushions
To increase/decrease support: Rotate
thumbwheel forward/rearward
To increase/decrease lateral
support: Press button (3) right/left
to increase/decrease
To activate massage function press
button (4); indicator light on switch
lights when active
*Standard and optional equipment will vary
once