Advertisement
Flush Mount Tweeter Installation
For ease of installation there are two ways of fixing the tweeters in place.
The first requires the use of the metal ring provided. (See Figure A)
After finding a suitable position for the tweeters place the cut out template for the tweeter in
position and mark around it.
Before cutting the holes double check that no brake, fuel lines or wiring harnesses are likely to
get damaged.
Ensure that the tweeter when fitted will not catch on any moving parts such as door / window
handles.
If mounting in a door check that the window can still be fully lowered before installing.
Cut out the hole carefully.
Place the entire tweeter into the cut out hole.
From the back push the metal ring over the rear of the casing until it is tight into the hole.
The second requires the use of the metal strip provided. (See Figure B)
After finding a suitable position for the tweeters place the cut out template for the tweeter in
position and mark around it.
Before cutting the holes double check that no brake, fuel lines or wiring harnesses are likely
to get damaged.
Ensure that the tweeter when fitted will not catch on any moving parts such as door / window
handles.
If mounting in a door check that the window can still be fully lowered before installing.
Cut out the hole carefully.
Position the metal strip fixing strip centrally, behind the cut out hole.
Using the fixing screws attach the base of the tweeter case to the metal strip.
Pass the tweeter cable through the hole in the centre in the bottom of the case and the metal
fixing strip.
Pull the cable tight until the tweeter sits in the base.
Screw the top of the tweeter casing to the base.
Caution do not over tighten.
Wiring Examples
ED209 connected to amplifier (ED7400/
ED7800/ED71600)
ED206 connected to ED901 CD/Tuner
Limited Warranty
All EDGE goods are covered by a full 12 months
manufacturers warranty. Valid from the date of the
original receipt and proof of purchase. In order to
validate this warranty, the warranty card should be
returned to EDGE within seven days of the original
purchase date. The original receipt and packaging
should also be kept for this 12 month period.
If at any stage during the warranty period you have a
problem with the product then it should be returned
to the point of purchase in its original packaging,
complete and with no items missing.
If the store is unable to fix the product it may have
to be returned to EDGE this process takes around 7
working days.
A full description of EDGE's warranty information
can be found on our website:
www.edgecaraudio.com/warranty
A written version can also be obtained from
EDGE warranty department
PO Box 11000
B75 7WG
Copyright
All content included in this manual such as text, graphics,
logos, icons, images data, the selection and arrangement
thereof, are the property of EDGE Audio (herein referred
to as "EDGE", "us" or "we") and its affiliate or their
content and technology providers, and are protected by
United Kingdom and International copyright laws. All
rights reserved.
Trademarks
EDGE ED2
, EDGE ED3
, EDGE ED4
, EDGE ED5
TM
TM
TM
EDGE ED6
, EDGE ED7
, EDGE Street
and
TM
TM
TM
EDGE Loud
and all stylised representations of
TM
product names, or the abbreviations of product names,
as logos are all trademarks of EDGE. Graphics and
logos are trademarks or trade dress of EDGE Audio or
its subsidiaries.
EDGE's trademarks and trade dress may not be used in
connection with any product or service that is not EDGE's,
in any manner that is likely to cause confusion among
customers or in any manner that disparages or discredits
EDGE. All other trademarks not owned by EDGE or its
subsidiaries that appear in this manual are the property
of their respective owners, who may or may not be
affiliated with, connected to, or sponsored by EDGE or
its subsidiaries.
We reserve the right to make needed changes or
improvements to the produc and this manualt , without
informing the customer about this in advance
TM
Advertisement
