Advertisement
VH7i
7" HDMI LCD Monitor with IPS Panel QUICKSTART GUIDE
CONFIGURATION OF SETTING MENUS
Brightness
Contrast
Chroma
Sharpness
Tint
Color Temp.
OSD Language
OSD Duration
Luma Under Warn
Luma Over Warn
Fuction 1-4
Menu Setup
System Reset
0-100
0-100
0-100
0-100
0-100
5600 K
6500 K
9300 K
MANUAL
English
Chinese
5-60 second
Window 1
Window 2
HV Delay
Guides
Crosshair
Peaking
False Color
Clip Guide
Underscan
DSLR Scaling
Check Field
Pixel
Guide Masks
User 1-5
The MANUAL function allows you to change the values of Red, Green, and Blue (RGB).
As an additional tool associated with the VH7i's False Color feature, ikan's exclusive
Adjustable Under Exposure and Over Exposed Waning feature gives the operator full
control of the VH7i False Color brightness values. By setting the preferred IRE exposure
limits, the operator is warned when the image exposure is exceeding or falling under
the preset IRE limit, providing customizable, full image exposure control.
This function displays a side by side comparison of the incoming video signal. Pushing
the F1/2 button one time will enter the mode. Each time the F1/2 button is pushed it
will freeze the current frame on the right hand side of the display while the left continues
to display the live signal. Pressing the exit button will exit the window mode.
Use Window 1 for 16:9 signals and Window 2 for 4:3 signals.
This function displays the blanking portion of the incoming signal.
Display a crosshair on the center of screen.
The VH7i is equipped with Monochrome Peaking features which highlight the desired
focus area in a bright, red outline. The operator adjusts the focus control until the red
indicator outlines on the desired area are razor sharp, indicating optimal focus. For the
best results, be sure the subject is properly exposed.
The False Color feature utilizes a full spectrum of assigned color indicators, ensuring
awless shot exposure. As the camera Iris is adjusted, the subject of the image will
change color based on speci c brightness values indicating optimal exposure. See
included chart for color assignments.
The VH7i offers adjustable upper Clip Guide levels to accurately display overexposed
images in any shooting condition. The operator simply assigns the upper IRE to their
preference and any exposure over the set IRE limit will ash in a vivid purple, indicating
only the over exposed area.
The DSLR Scaling function will allow users to extend their DSLR camera's HDMI video
output any option of four – Normal, 3:2, 16:9 or Full Screen – convenience made simple.
The LCD panel in this display has a native display of 1280 x 800 pixels. A signal of any
other resolution is scaled to t this native resolution. There may be time when it is
desired to view the incoming signal without scaling. Enabling Pixel to Pixel mode turns
off the scaling and displays a 1280 x 800 pixel window of the original image. Each pixel
of the panel displays one pixel of the original image. The user may use the arrow buttons
(buttons 3-6) on the monitor face to move the window left, right, up and down to see the
desired portion of the image.
Select throught various aspect ratio masks.( 15:9, 4:3, 1:5:1 , 1.85:1, 2:1 , 2.35:1 )
This function recalls user de ned values settings .The user setting will remain in memory
inde nitely and can be erased by using the reset option in the main menu.
Advertisement
