Output Specifications - Aiphone IX-MV Setting Manual

4.2. Output Specifications

Configure the settings for output specifications of each station.
4.2.1. Relay Output Specifications
 Output Time [msec / sec] ♦
Description
Settings
Default values
 Usage
Description
Settings
Default values
Point
If "New System" is chosen from "Login and registration of the station," the settings for "Usage"
will be "Door Release" when "Automatically configure door release for all stations?" is enabled.
System Settings (Settings (Station View))
Set the output time of the relay output for each station.
The entry is identical to "Output Time [msec / sec] ♦"
changed, "Output Time [msec / sec] ♦"
• 0 (Momentary): Delivers output while Master Station presses "Door Release" button.
• 200-2000 msec (by 200 msec)
• 3-300 sec (by 1 sec)
200-2000 msec, 400 msec
Set the usage of relay output for each station.
The entry is identical to "Usage"
➤ P.248
"Usage" will be changed as well.
• Blank: Not used
• Door Release: Output to release the door.
• Paging Control (Door Station only): Output while paging. Regardless of "
time" setting, the output is active for the duration of paging audio.
• Contact Input Call / Communication State (Door Station only): Delivers output during
a call or communication triggered by the contact input.
Blank
➤ P.248 will be changed as well.
➤
P.248. When the setting is changed,
237
➤
P.248. When the setting is

Output