High performance passthrough Dishwasher - Operator Manual Power Cord Replacement • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard 3 XU - Operator Manual 140610...
High performance passthrough Dishwasher - Operator Manual • If machine doesn’t fill after switching on power, check & ensure that hot water supply tap is open, water supply pressure is not below specification. 4 XU - Operator Manual 140610...
Cycle times are short and water co there is no advantage in overloadi CYCLE TIMES OPERATION The XU has a 2 minute cycle. Load rack into machine and shut door. Press start button - Cycle light glows green while machine CHEMICAL operates.
Page 7
For advice on drying agents cal supplier. Manufactured in New Zealand by Washtech Ltd. 414 Rosebank Road, Avondale, Auckland 1026 Tel (09) 829 0930 | Fax (09) 828 9351 Web www.starline.co.nz...
Page 12
Manufactured in New Zealand by Washtech Ltd. 414 Rosebank Road Avondale Auckland 1026 New Zealand PO Box 90548, Auckland 24HR Service 0800 Starline 09 829 0930 09 829 0935 E-mail info@washtech.co.nz www.starline.co.nz ISO9001 All Washtech products are designed and...
Need help?
Do you have a question about the XU and is the answer not in the manual?
Questions and answers