GRAUPNER RC-SOCCERBOT Operating Instructions Manual page 23

3. Assembling the RC-SOCCERBOT
3.9 Mounting the power supply cables
How to do
• Lead the charging jack (1) through the corresponding, larger boring of the drive platform and screw from
above.
• Stick main switch (2) from above through the boring next to the charging jack (1) and screw from below.
• The red and black cable of the main switch (2) is connected with the cables of the charging jack (1), pay
attention at the same time to the correct color encoding.
• The smaller white cable of the main switch (2) is connected with the controllerboard, note at the same
time the encoding of connector and bushing.
• Finally a rechargeable battery can be connected for the power supply. The battery is not included in the
kit, we recommend Order No. R7100 - battery 2 x 6-NiMH1100, 7.2 V / 1.1 Ah.
Assembling the RC-SOCCERBOT - Mounting the power supply cables 23