Advertisement
1st MENU
Displayed
(scrolling with the and the buttons)
7. CHARACTERISTICS AND PERFORMANCE DATA
DESCRIPTION
VALUE
LED Power
36 W
Power supply
100/240 V nominal, 50/60 Hz
This product uses a 5-pin
XLR for DMX input and
output.
Use a shielded data cables.
DMX Data link
Do not overload the daisy
USITT DMX512-A
chain. Up to a maximum of 32
devices can be used on a
single DMX chain.
DMX
Channels:
Protection
Class 1–
Class
required
Specifications subject to change without notice.
This Manual is applicable to the following products
LD 300 starting from S.N. ____
2nd MENU
Displayed
(after pressing the X that stands for ENTER)
1 at 8bit: Dimmer
2 at 8bit: Dimmer w. strobe
2 at 16bit: Dimmer
3 at 16bit: Dimmer w. strobe
ground connection
Explanation of Each MENU FUNCTION
CHANNEL SETTING (RESOLUTION & FUNCTION)
This Function is to set the DIMMING RESOLUTION either at 8 bits or at 16 bits.
Once CHAN is displayed, act on the or buttons to scroll through the following
choises:
8D: 8 bits resolution (the display will show 8D and this is the default setting).
The Fixture utilises 1 DMX Circuit for the Light Dimming, which is the
BASE CIRCUIT set in the ADDRESS.
8DS: NOT ACTIVE (for future use):
The foreseen function for this setting is: 8 bits resolution and STROBE (the display will show
8DS). The Fixture will utilise 2 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS will be the LIGHT DIMMING
and the second circuit (BASE +1) will be the STROBE
16D: 16 bits resolution (the display will show 16D).
The Fixture utilises 2 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS is the Coarse Dimming,
the second Circuit (BASE +1) is the Fine Dimming.
16DS: NOT ACTIVE (for future use):
The foreseen function for this setting is: 16 bits resolution and STROBE (the display will show
16DS). The Fixture will utilise 3 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS will be the Coarse Dimming,
the second Circuit (BASE + 1) will be the Fine Dimming
the third CIRCUIT (BASE + 2) will be the STROBE
Of course the 16 bits function is useful if the corresponding circuits on the DMX
LIGHTING BOARD are also set at 16 bits.
WARNING: if the LED FRESNEL is set at 16 bits, but more units are having a consecutive unitary
address (for instance first fixture set at Address 1, second fixture set at Address 2 and so forth,
the DMX Channel controlling the Coarse Dimming of the second unit, will also control the fine
dimming of the first unit. In this case it is recommended that all fixtures are set to 8 bits
resolution).
DMX LEVEL
It Shows the DMX Input level on percentage (0-99% and FULL) received effectively
from the Fixture.
Press ENTER to exit this MENU
DESCRIPTION
Protection Type
Max Housing surface
temperature
Weight of Fixture
Weight of barndoor
Weight of color frame
Size of scrims & color
frame
Size of Barndoor ring
Lens diameter
Pag 5.
.
.
VALUE
IP 22
70 °C
M.O.
3,5 kg.
4 leaf
8 leaf
0,3 kg.
0,4 kg.
0,2 kg.
Accessories Diameter
129 mm
Ring Diameter
133 mm
120 mm.
Revised March 29th 2012
Advertisement
