Tethering; Usb Tethering; Network; Wi-Fi Hotspot - LG G PAD 7.0 LTE User Manual

TETHERING

Tethering allows you to connect other devices to share your tablet's
internet connection. Choose Mobile Broadband Connect, Mobile
Hotspot, or Bluetooth tethering.
USB tethering – Tap the USB tethering switch
and off (gray). On allows you to share the tablet's mobile data connection
using a USB connection. This setting is gray if not connected via USB.
Wi-Fi hotspot – Tap the Wi-Fi hotspot switch
and off (gray). On allows you to use your tablet as a Mobile Hotspot for
other devices to use your mobile network connection.
Tap Wi-Fi hotspot to access its settings.
Set up Wi-Fi hotspot – Allows you to enter the SSID and other
information to configure your mobile hotspot.
Timeout – Allows you to set the amount of time before turn off the
connection.

NETWORK

Mobile networks – Allows you to set up options for networks and APNs
(Access Point Names).
Mobile data – Checkmark to enable data access over the mobile
network.
Global data roaming access – Sets your data services while roaming.
Choose from Deny data roaming access, Allow access only for this
trip, and Allow access for all trips.
Network type and strength – Displays the current network type and the
signal strength.
Access point names – Allows you to select and manage your APNs. for
data service. Tap an APN in the list, tap the APN, modify it as necessary,
then tap OK. Tap the Menu icon
Roaming state – Displays your current roaming state.
to toggle it on (blue)
to toggle it on (blue)
to select Save or Discard.
Settings
101