Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Parklands PUS4040 Little Roo
Summary of Contents for Parklands PUS4040 Little Roo
- Page 1 LITTLE ROO Instruc onal Manual BJ2010 MODEL: PUS4040...
-
Page 2: Responsibility Of The Owner
OWNER S INFORMATION This instruction book is written for a person with some mechanical ability. Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit. Know your product: If you understand the unit and how the unit operates, you will get the best performance. - Page 3 IMPORTANT Safe Operation Practices for Walk Behind Mowers. This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. I. General Operation tion which can cause drowsiness or a ect your ability to operate this machine safely.
- Page 4 IMPORTANT DO NOT: nect the spark plug wire, and keep the wire away f rom the plug t o prevent accidental Do not mow near drop offs, ditches, or em- starting. Always wear eye protection when bankments. The operator could lose footing you make adjustments or repairs.
-
Page 5: Safe Mowing Guide
SAFE MOWING GUIDE Every person w ho u ses power equipment gency. Learn how to cut and how to keep con- must learn the difference between proper and trol of the mower at all times. improper use, safe and unsafe mowing prac- Many mowers are started manually. - Page 6 SAFE MOWING GUIDE improve the performance, help the engine stay bruises, or even put out an eye. Often the per- son hurt by a thrown object is a bystander such cooler, extend t he Lif e of m oving parts, a nd as a child, another family member or a neigh- minimize the danger of fire.
- Page 7 SAFE MOWING GUIDE Use only original equipment or approved sub- in the rain is no fun and it is dangerous. Always stitutions as service parts. If you need profes- seek shelter in an electrical storm. In extreme- sional s ervice, select a s hop that i s an ly dry mowing conditions, your safety glasses Authorized S ervice C enter for y our brand of can serve a dual purpose by protecting your...
- Page 8 SAFE MOWING GUIDE While mowing, if you hit a foreign object, stop position w hen mowing a nd b agging. W hen the engine. Remove the spark plug wire. Care- bagging, slower ground speed will provide the fully a nd t horoughly inspect the mower for best results.
-
Page 9: Steps To Follow
STEPS TO FOLLOW BEFORE MOWING Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes. Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. Fill the fuel tank outside. Clean off spilled fuel. Read and follow the Owner s Manual, the instructions with the engine, and the instructions with any attachments. -
Page 10: Table Of Contents
ASSEMBLY Read and follow the assembly and adjustment NOTE: Torque is measured in foot pounds instructions for your mower. All fasteners are (metric N.m). This measurement describes in the parts bag. Do not discard any parts or how tight a nut or bolt must be. The torque material until the unit is assembled. -
Page 11: 1X111
ASSEMBLY Bolt WARNING: T he c hute deflector 1x121 is necessary for your safety and protection. D o not operate the mower if t he c hute d eflector is Washer missing or is not installed cor- 17x37 rectly. 15x116 1. - Page 12 ASSEMBLY HOW TO ASSEMBLE THE CONTROLS TO THE HANDLE Two types of handles are shown in Figure 4. with Tecumseh engine, make sure the stop The engine o n your m odel w ill determine lever bracket is on the rights ide of the han- which type of handle is on your model.
-
Page 13: Assembly
ASSEMBLY 3. Attach the engine stop cable to the en- Briggs gine. Models w ith Briggs & S tratton en- Engines gines are shown in Figure 6. Models with Tecumseh engines are shown in Figure 5. 4. Make sure the engine stop cable moves freely. - Page 14 ASSEMBLY HOW TO ASSEMBLE THE WHEELS WITH AXLE BOLTS Assemble the wheels to the wheels axles lock the washer around the axles to fix the wheels. Figure 8 HOW TO PREPARE THE ENGINE IMPORTANT: This unit is equipped with an internal combustion engine and must not be used on or near any unimproved forest covered, brush covered or grass covered...
- Page 15 OPERATION ENGINE STOP LEVER WARNING: A lways use a safety gasoline container. Do not smoke Release the engine stop lever and the engine when adding gasoline to the fuel and the blade will automatically stop. To run tank. When inside an enclosure, the engine, hold the engine stop lever in the Operating position (Figure 9).
-
Page 16: Engine Maintenance
MAINTENANCE ENGINE MAINTENANCE Grass and other debris can keep the mower from working correctly. A fter you mow, clean Use the following maintenance section to keep the mower housing as follows. your unit in good operating condition. A ll the 1. - Page 17 MAINTENANCE BLADE SERVICE 6. Mount the blade with the curved edges to- ward t he h ousing. If t he b lade i s upside WARNING: B efore y ou i nspect down, the blade will not cut correctly and the blade or the blade adapter, can cause an accident.
- Page 18 MAINTENANCE CHECK THE LEVEL OF CUT Test the unit in a small area. If the height of cut Blade is not level or if the cut grass is not discharged, the cause can be: (1) the blade is bent or dam- aged, (2) the blade is n ot s harp, (3) a worn blade, (4) or a broken blade adapter.
-
Page 19: Trouble Shooting Chart
TROUBLE SHOOTING CHART The Engine will not start. 1. Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline. 2. On a cold engine, push the primer button (optional on some models). For the number of times required to push the primer button, see the engine manufacturer s instructions.
Need help?
Do you have a question about the PUS4040 Little Roo and is the answer not in the manual?
Questions and answers