ABB RPB 320 Instruction Manual page 2

The information in this document can be subject to change without prior notice and should not be
regarded as an undertaking from ABB. ABB assumes no responsibility for errors that can appear in
this document.
ABB is not responsible for damage incurred by the use of this document or software or hardware
described in this document.
The document, or parts there of, may not be reproduced or copied without prior permission from ABB.
It may neither be imparted to a third party nor otherwise used without authorisation. Infringement here
of will be subject to action in accordance with applicable laws.
Further copies of this document can be obtained from ABB at current prices.
 ABB Automation Technology Products AB
Article number: 505 890-102
Date: 2003-05
ABB Automation Technology Products AB
Arc Welding & Application Equipment
S-695 82 Laxå
Sweden