RCA LED55G55R120Q User Manual

English
LED LCD TV
User's Manual
MODEL
LED55G55R120Q
Please register your product at www.rca.com
Please keep your sales receipt and keep the record of the serial number
and the date of purchase in order to receive warranty parts and service.
The serial number is located at the back of the TV.
Serial Number
Date of Purchase
17. Never push objects of any kind into this TV through openings
as they may touch dangerous voltage or other electrical parts that
Safety Precautions
could result in fire or electric shock. Never spill liquid of any kind into
the TV.
1. Read these instructions. 18. Unplug the TV from the wall outlet before cleaning. Do not use
2. Keep these instructions. liquid or aero cleaners. Use a damp cloth for cleaning.
3. Heed all warnings.
19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
4. Follow all instructions.
as a bookcase or rack unless proper ventilation is provided or the
5. Do not use this apparatus near water. For example, do not use
manufacturer's instructions have been adhered to.
near a laundry tub, in a wet basement, or near a swimming pool,
and the like.
20. Do not place this TV on an unstable cart, stand, tripod, bracket,
or table. The TV may fall, causing serious injury to someone, and
6. Clean only with dry cloth.
serious damage to the appliance.
7. Do not block any ventilation openings. Install in accordance with
21. Do not attempt to service this TV by yourself because opening
the manufacturer's instructions. Slots and openings in the cabinet
or removing covers may expose you to dangerous high voltage or
back or bottom are provided for ventilation, to ensure reliable
operation of the TV and to protect it from overheating. These other hazards. Refer all servicing to qualified service personnel.
openings must not be blocked or covered. The openings should
22. This device complies with Part 15 of the FCC Rules. Operation
never be blocked by placing the TV on a bed, sofa, rug, or other
is subject to the following two conditions: (1) this device may
similar surface.
not cause harmful interference, and (2) this device must accept
8. Do not install near any heat sources such as radiators, heat any interference received, including interference that may cause
registers, stoves, or other apparatus (including amplifiers) that undesired operation.
produce heat.
23. WARNING: To prevent injury, this apparatus must be securely
9. Do not defeat the safety purpose of the polarized or grounding- attached to the floor/wall in accordance with the installation
type plug. A polarized plug has two blades with one wider than the instructions.
other. A grounding-type plug has two blades and a third grounding
24. To reduce the risk of electric shock, the grounding of center pin
prong. The wide blade or the third prong is provided for your
of plug must be maintained.
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
25. If an outside antenna or cable system is connected to the TV,
be sure the antenna or cable system is grounded to provide some
10. Protect the power cord from being walked on or pinched
protection against voltage surges and built-up static charges.
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus. Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
11. Only use attachments/accessories specified by the
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
manufacturer.
antenna discharge unit, connection to grounding electrodes, and
12. Use only with cart, stand, tripod, bracket, or table specified by
requirements for the grounding electrodes. (See figure A)
the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
A TV and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the TV and
cart combination to overturn.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
For added protection for this TV receiver during a lightning storm,
Safety Strap
or when it is left unused for long periods of time, unplug it from the
wall outlet and disconnect antenna or cable system.
Caution: Pushing, pulling or climbing on the TV may cause the TV
This will prevent damage to the TV due to lightning and power line falling. Do not let children climb or hang on the TV. Always place the
surges.
TV on a sturdy, level, stable surface that can hold the weight of TV.
And if possible, secure the TV according to the instruction below
14. Refer all servicing to qualified service personnel. Servicing is
(Note: The fastening components such as screws are not supplied
required when the apparatus has been damaged in any way, such
with TV).
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
Step one: Insert the M6 mounting screws into the upper two wall
exposed to rain or moisture, does not operate normally, or has
mounting screw holes and fasten them (Figure B).
been dropped.
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).
15. This TV should be operated only from the type of power supply
indicated on the rating label.
If customer is not sure the type of power supply in your home,
consult your appliance dealer or local power company. For TV
remote control battery power, refer to the operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV set.
Part No.: RN0355R24008
CONTENTS
Child Safety Guide 02 Choosing TV Channel
Caution and Warning 02 Selecting Input Source
04 Channel Bar
Safety Precautions
Preparation for Your New TV 05 Adjusting Volume
Check Accessories 05 EPG (Electronic Program Guide)
Setup TV Table Stand 05 OSD Menu Operations
05 Adjust the OSD Screen
Select TV Location
Quick Menu
Connection and Using 05
Channel Menu
TV Signal Connection 05
Picture Menu
Cable Connections 05
Audio Menu
Side Panel Connections 05
Time Menu
Connecting AV Composite video device 05
Setup Menu
Connecting YPbPr Component device 06
Lock Menu
Connecting HDMI device 06
Frequently Asked Questions (FAQs)
How to obtain various kinds of Input Sources 06
Troubleshooting
TV Jacks Explanation 06
Wall Mounting Unit Specification
Keypad and Front Panel 07
USB Media Play
Keypad Buttons 07
Product Specification
Front Panel 07
Warranty Card

Basic Operations

07
07
Turning On and Off
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC
MADE FOR TODAY
Preparation for Your New TV Cable Connections
Choose Your Connections
Before Turning On TV
Check Accessories TV LED55G55R120Q supports various connections to other
devices (such as DVD, VCR, Set-top box, etc.). Please follow the
Check the accessories that are packed with your TV.
table to choose the cables which adapt to your device.
(refer to Quick Start Guide)
Setup TV Table Stand
Please refer to Quick Start Guide to carry out stand installing.
Select TV Location
Select a flat, stable table to place your TV set. Please follow the
safety instructions when placing the TV.
Connection and Using
After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 5
to page 6.
Caution: Unplug the AC cord when you connect other devices to
TV.
TV Signal Connection Side Panel Connections
The first step in connecting your TV is obtaining the signal. Your Connecting AV Composite device
TV LED55G55R120Q has a back panel, which allows you to receive
(Good Video Quality)
4 5
analog and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable Composite connector will be shared with Component Y connector.
service to obtain the signal. To connect a composite AV device, such as a DVD player, follow
these steps:
1.Connect the COMPOSITE jack on the side of TV to the video
A. Antenna
output jacks of device via video cable (yellow).
Connect the antenna to TV via coaxial cable on ANT/CABLE jack
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
of the back panel. You are ready to receive air local digital and
analog channels. output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
B. Cable TV service channel jack and plugs are red.
Connect the cable TV wall jack to TV via coaxial cable on
Note: AV signal belongs to composite video. This kind of video
ANT/CABLE jack of the back panel. You are ready to receive off-air
signal has regular good display quality.
local digital and analog channels.
Composite Video Connection
C. Set-Top Box
The picture below is an example of a connection using the
If you use a set-top box, you may need to call your cable company
composite video jack.
or satellite service provider, which use a special connection, please
refer to the user's guide of set-top box.
Note: Do not plug the AC cord until you have accomplished all the
connections. This TV does not support QAM under cable channel
search.
Child Safety Guide
Congratulations on your purchase! As you enjoy your new product,
please keep these safety tips in mind :
The Issue Tune Into Safety
The home theater entertainment experience is a - One size does NOT fit all. follow the manufacturer's
growing trend and larger flat panel displays and recommendation for the safe installation and use of
07 popular purchases. your flat panel display.
However, flat panel displays are not always supported - Carefully read and understand all enclosed
07
on the proper stands of installed according to the instructions for proper use of this product.
manufacturer's recommendations.
- Don't allow children to climb on or play with
08
Flat panel displays that are inappropriately situated furniture and television sets.
on dressers, bookcases, shelves, desks, speakers,
- Don't place flat panel displays on furniture that can
08
chests or cats may fall over and cause injury.
easily be used as steps, such as a chest of drawers.
08
- Remember that children can become excited while
watching a program, especially on a "larger than life" flat
08 panel display. Care should be taken to place or install
the display where it cannot be pushed, pulled over, or
knocked down.
08 This Manufacturer Cares!
- Care should be taken to route all cords and cables
08
The consumer electronics industry is committed to connected to the panel display so that they cannot be
making home entertainment enjoyable and safe. pulled or grabbed by curious children.
08
1 2
08
Wall Mounting :
IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :
09
- Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL,CSA,ETL).
09
- Follow all instructions supplied by the display and wall mount manufacturers.
- If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
10
professional installation.
10 - Make sure that the wall where you are mounting the display is appropriate. Some block construction. If you are
unsure, contact a professional installer.
- A minimum of two people are required for installation. Flat panel displays can be heavy.
11
12
Caution and Warning
13
13
14
14
Connecting YPbPr Component device
HDMI Connection
(Better Video Quality)
The picture below is an example of a connection using the HDMI
To connect a component device, such as a DVD player, follow video jack.
these steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to
the video output jacks of device via video cable (green, blue and
red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal
has better display quality.
Component Video Connection
The picture below is an example of a connection using the component
6 video jack.
6
5 6
How to Obtain Various Kinds of Input Sources
After connection is done, press INPUT button on remote control
Connecting HDMI device
or TV top panel to choose the input source you need. See page 7,
(Best Video Quality) Basic Operation of TV.
To connect a HDMI device, such as a DVD player, please Connect
the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output
TV Jacks Explanation
jacks of device via HDMI cable.
To connect a DVI device, via DVI port of PC or Device and HDMI
jack of TV:
1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI
port of PC via HDMI-DVI cable.
2. Connect the L-AUDIO-R jack on the side of TV to the audio
output jack of computer with audio cable (dual-channel RCA jacks
to 3.5mm stereo jack or the L-AUDIO-R jack).
To connect an ARC HDMI OUT device, please connect to the HDMI
input port of the device such as amplifier,
Note: 1. HDMI (High-Definition Multimedia Interface) is a compact
audio/video interface for transmitting uncompressed digital data. It
carries the audio and video signal via the same cable and has the
best display quality.
2. HDMI-DVI cable transfers only video signal from DVI port of
DVI device to HDMI jack of TV. For audio signal, please connect
audio output to L-AUDIO-R jack on TV back panel.
Guía de seguridad para niños
!
¡Muchas gracias por su uso del presente producto!
CHILD
Cuando usted disfruta de su nuevo producto, por favor tenga
SAFETY
en cuenta los consejos de seguridad:
It makes A Difference How and Where
You Use Your Flat Panel Display
Posibles Problemeas
- La experiencia de entretenimiento de cine en casa
es una tendencia creciente y los grandes monitores
de pantalla plana son muy populares.
embargo, los monitores de pantalla plana no se
han instalado siempre en los soportes adecuados o
instalado de acuerdo con las recomendaciones de
fabricante.
- Los monitores de pantalla plana que se han
instalado inadecuadament en tocadores, estanterías,
estantes, escritorios, oradores, baúle s o carros se
pueden caer y causar el daño corporal.
¡Al Fabricante le Importa
- La industria electrónica del consumidor está
comprometida a hacer el entretenimiento de casa
agradable y seguro.
2 3
Montaje de Pared:
SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE
- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorio
independiente(como U L, CSA, ETL).
- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.
- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,
contacte a su distribuidor para la instalación profesional.
- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared
no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de
ceniza. Si usted está inseguro, contacte a un instalador profesional.
- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.
FCC Notice
Fcc Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may ca use harmful interference to radio
Communications.
However, there is no Guarantee that interference will not occur in a
particular installation.
HEAD PHONE: Connect a 3.5mm headphone for personal audio.
USB: Connect your USB storage device to enjoy music/photo files
on your TV. (Also used for service purpose).
HDMI IN
HDMI1/DVI, 2: (High-Definition Multimedia Interface) It provides an
uncompressed digital connection that carries both video and audio
data by way of an integrated mini-plug cable.
MHL: (Mobile High-Definition Link) To standard HDMI input, transmit
the video/audio from portable electronic device (cellphone,digital
camera, digital-video camera,) to TV set.
ARC: (Audio Return Channel) Adopted in TV output of digital audio, can
be connected to the device supporting ARC, transmit the TV sound to the
device.
COMPONENT Y/Pb/Pr: Connect a device that has component
video jacks, such as a DVD player. To access device connected
to the Y/Pb/Pr jack, press the INPUT button on your remote; then
press the up/down arrow to select Component. Press the OK
button at last to confirm.
Y/Pb/Pr (Component Video): They provide good picture quality
because the video signal is separated into three components. Use
three video-grade or component video cables for the connection.
When using Y/Pb/Pr, make sure you connect left and right audio
cables to the AUDIO IN R/L jacks.
L-AUDIO-R, COMPOSITE: Connect an AV device that has
composite video jacks, such as a VCR or a DVD player. To access
device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the
OK button at last to confirm.
AUDIO IN L: Left audio channel connection. The left audio
connector is usually white. For mono audio sources, be sure to
use the left AUDIO INPUT.
AUDIO IN R: Right audio channel connection. The right audio
connector is usually red.
ANT/CABLE: Connect to receive the signal from your antenna or
cable via coaxial cable.
Digital Audio out: Connect a coaxial cable for digital audio
output.
6 7
Keypad and Front Panel
Keypad Buttons
If you cannot locate your remote, you can use the keypad buttons
on your TV to operate many TV features.
Displays the Source Select List.
Displays the TV Main Menu.
Scans up through the channel list.
In the TV menu system, it acts like the up arrow on the
remote control and can be used to select menu options.
Scans down through the channel list. In the TV menu
system, it acts like the down arrow on the remote
control and can be used to select menu options.
Increases the volume. In the TV menu system, it acts
like the right arrow on the remote control and can be
used to select menu options.
Decreases the volume. In the TV menu system, it acts
like the left arrow on the remote control and can be used
to select menu options.
Turns the TV on and off.
!
SEGURIDAD
DE NIÑOS:
El Cómo y Doónde Usted usar Su
Monitor de Panntalla Plana
Marca La Diferrencia
Ajustar Hasta Seguridad
- Un tamaño fijo NO es adecuado para todos. siga las
recomendaciones de fabricante para la instalación segura y
el uso de su monitor de pantalla plana
- Lea con cuidado y entienda todas las instrucciones
adjuntas para el uso propio de este producto.
- No permita a los niños a subir al equipo o jugar con
muebles y televisiones.
- No cloque los monitores de pantalla plana en el mueble
quese puede usar fácilmente como escalón, así como una
cómoda.
- Recuerde que los niños pueden llegar a ser excitados al ver
una programación, especialmente en el monitor de pantalla
plana "más grande que vida". El cuidado se tiene que
empezar por poner o instalar el moniotr donde no se puede
empujar, detener al castado del camino ni echar abajo.
- El cuidado se tiene que empezar por encaminar todos
los cordones y cables conectados al monitor de pantalla
plana para que no se puedan tirar o agarrar conectados
al monitor de pantalla plana para que no se pueden tirar o
agarrar por los niños curiosos.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Device complies with FDA radiation performance standards, 21
CFR subchapter.
Caution: (Invisible) Laser Radiation when open.
Do not stare into beam.
Front Panel
About remote control
working distance and
angle, see the quick
start guide.
Remote Control Sensor
Power/Standby Indicator
Power/Standby Indicator: Light up in red when the TV is in
standby mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which
receives infrared ray sent by remote control.
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775
Basic Operations
Turning On and Off
Connect the AC cord to power the LED LCD TV. At this time the
TV will enter standby mode and power indicator will turn red. Use
Power button ( ) on the top panel of TV or on the remote control
to turn on the TV. After switching off the TV for 5 seconds, you can
turn on TV again.
Choosing TV Channel
Tuning To Analog Channels
an analog channel has a channel number beginning with "A".
Input the digital number with numeric buttons directly and press
OK button to confirm. For example, to watch analog channel "A51",
press "5", "1", "OK" on remote control in sequence.
Note: Although there is no analog TV signal available in America,
we reserve ATV functions for some expansible use.
Tuning To Digital Channels
A digital channel has a channel number beginning with "D". Input
the main digital number with numeric buttons directly, then press
"-" button on remote control, and input the sub number at last.
For example, to watch analog channel "D31-1", press "3", "1", "-",
"1", "OK" on remote control in sequence.
Changing Channels Directly You can use CH button to increase
channel number and CH to decrease channel number.
When no OSD (On Screen Display) is used, the up/down arrows
can also work as CH /CH buttons.
Selecting Input Source
Press INPUT button on remote
control to display Source Select list.
Use up/down arrows to highlight the
USB
source you need and press OK to
Move OK Select
confirm.