Table of Contents
Advertisement
CLEANING continued
Excessive Mineral Build-up
4. Use a delimer solution, which is safe for cast aluminum, on the steam generator surface.
Follow the instruction provide with the delimer solution.
5. Use a dry towel or sponge to remove the delimer solution, then rinse with clean water.
6. Install the diffuser, generator cover secure with the wing nut as shown here.
6. Plug the steamer power cord into the power supply, and turn unit on.
7. Allow unit to reach operating temperature.
CAUTION
KEEP HANDS AND FACE AWAY FROM THE UNIT WHEN OPERATING THE UNIT. STEAM
ESCAPING IS VERY HOT.
8. Push the Green "Steam Shot" button several times to operate the steamer.
This removes any delimer solution from the generator surface.
9. Turn unit off, reinstall all remaining parts and return unit to operation.
8
Advertisement
Table of Contents
