Table of Contents
Advertisement
YWH100 IP Phone User manual V1.38
●Call type: Set call type by selecting the items in drop down list.
normal: Call out in normal way by selecting this item.
faststart: Call out in faststart way by selecting this item.
advanced: Call out in faststart and tunneling way by selecting this item. It is a
recommended way with H323 protocol used.
●dtmf: Set DTMF signal sending way by selecting control string, inband audio, signal
keypad or rfc 2833 from dropdown list.
(3)phone settings
●fwd number: Enter receiving forwarded calls phone number into this field; If the IP
phone used with modem, with modem item selected in iptype list box, and then fill ISP
number into this field.
●fwd poweroff: Forward calls if power off by checking this box. Please enter receiving
forwarded calls phone number into fwd number field.
●fwd always: Forward all calls by checking this box. Please enter receiving forwarded
calls phone number into fwd number field.
●fwd busy: Forward calls if busy by checking this box. Please enter receiving
forwarded calls phone number into fwd number field.
●fwd noanswer: Forward calls without replying by checking this box. Please enter
Fig 10 Phone Setting Page
Page 26 of 32
Advertisement
Table of Contents
