Table of Contents
Advertisement
YWH100 IP Phone User manual V1.38
③Set eTalk account
press
【Vol/+】
the screen, please press
flashing at the beginning of the second line. It indicates that you can change the setting of
this item. Then press 0117 keys once respectively, 3 key thrice, 8 key twice, 6 key thrice
and 7 key quintic. Then press
account
the
will be displayed on the LCD
0117ETNS
④Set eTalk pin
(409466193597)
press
【Vol/+】
the screen, please press
flashing at the beginning of the second line. It indicates that you can change the setting of
this item. Then press 409466193597 keys once respectively to input the password, and
then press
to confirm. After above operation,
【Spk】
displayed on the LCD.
⑤Save setting and exit setting
continually press
press
key to confirm the change. When the menu
【Spk】
the LCD, press
【Spk】
setting is effective.
Refer to above operation; you can reach any menu to modify any value. Please refer
to following structure illustrations to learn the values of each menu item. As for the
meaning of each item and value, please refer to Web Browser Setting chapter.
(5)Appendix
The following chart indicate the digital 、letter and mark according to the times
the corresponding character key is pressed in the setting mode.
：
(0117ETNS)
to turn over the menu , once
to enter change mode, then you will see a cursor
【Local IP】
to confirm. After above operation,
【Spk】
to turn over the menu, once
to enter change mode, then you will see a cursor
【Local IP】
to reach save setting menu
【Redial】
again to confirm. Once the IP phone restart successfully, the new
account
is displayed on
pin
is displayed on
pin
will be
409466193597
save
settings
save
is displayed on
Are you sure?
Page 15 of 32
. Then please
Advertisement
Table of Contents
