Automatic Sound - Blaupunkt Seattle MP74 Operating Instructions Manual

ADJUSTING THE VOLUME
being made, you will only be able to hear
the traffic announcement after the call
or navigation announcement is finished
(in so far as the traffic announcement is
still being broadcast). The traffic an-
nouncement is not recorded!
If, during a traffic announcement, a tel-
ephone call arrives or the navigation
system wants to output a spoken in-
struction, the traffic announcement will
be cancelled and the telephone call/
voice output can be heard.
You can set the volume level at which
telephone calls or navigation announce-
ments will first be heard.
Press the MENU button 9.
Press the softkey 5 assigned to
the "VOLUME" display item.
Press the softkey 5 assigned to
the "PHONE" display item in order
to adjust the volume.
Set the volume level that you want
using the volume control 2.
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
You can also adjust the volume during
the telephone call or navigation an-
nouncement using the volume control
2.
52

Automatic sound

This feature automatically adjusts the
volume of the car sound system to suit
the speed at which the vehicle is travel-
ling.
In order for this to work, your car sound
system must be connected as described
in the installation instructions.
The automatic volume boost can be set
to six levels (0-5). "0" means no boost
and "5" means maximum boost.
Press and hold down the AUDIO
button : for longer than two sec-
onds.
"DEQ+ MENU" is displayed in the top
line of the display.
Press the softkey 5 assigned to
the "AUTO SND" display item.
Move the joystick 8 up or down to
select the setting that you want.
Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
Note:
The optimum setting for the speed-de-
pendent volume adjustment feature
depends on how noise levels develop
in your particular vehicle. You will need
to test various settings in order to find
out which is best suited to your vehicle.