Table of Contents
Advertisement
ZTE G650/G651/G420/G120 GoTa Digital Trunking Phone
PTT Functions
Users could operate all PTT functions and perform corresponding settings
in PTT Functions .
▲
▼
Enter PTT Functions : In idle mode, press Menu to enter, press
/
/
/
key to select
, and press Select to enter.
Scan Function
If you have the authority for scan, press "PTT Function" and select Scan
Function, you can start your scan settings. This feature makes your
phone can only receive the group call which be set in the current scan list.
Other group calls not in the current scan list will be neglected except for
the Emergency Calls.
Start the Scan
Press "PTT Function" to select Scan Function, and then press Scan
Status. The default scan status is Off. In scan function on status, there are
two scan modes to choose. One is Normal mode, the other is Enhanced
mode.
Normal Mode
You should set the scan group among all the groups which the phone had
joined in. There are only four groups can be set as the scan groups at the
same time
Enhanced Mode
You can preset your own scan list in this mode. Each of your preset lists
can include none scan group or at the most four scan groups. You can
preset eight scan lists at the most, but only one of them can be in the scan
status at a time.
46
Advertisement
Table of Contents
