To Install Players - Breeze Digital Signage Installation Manual

To Install Players

Connecting the Breeze player:
Video Output:
1. Connect the HDMI cable to the HDMI output (#7) on the
Breeze player. Connect the other end of the HDMI cable to
the display monitor, television, or video distribution system
being used.
An HDMI to VGA adapter is needed if the display monitor offers only VGA video
input. Connect the VGA end of the adapter to the display monitor, and an HDMI
cable to the other end. Plug the HDMI cable into the Breeze player.
Ethernet:
1. Connect the Ethernet cable to the Ethernet input (#8) on the Breeze player.
Power:
2. Plug the power cord into to the 19.5V power supply and the electrical outlet. Plug
the 19.5V power supply into the Breeze player.
Speakers:
3. Connect the audio cables from the display monitor to the speaker output (#11) on
the Breeze player.
Breeze Installation Guide
5