Table of Contents
Advertisement
Entering the currently projected signal into the Entry List [STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button.
Calling up a signal from the Entry List [LOAD]
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼ button to select [EDIT] and press the ENTER button.
The Edit window will be displayed.
SOURCE NAME
INPUT
LOCK
SKIP
3. Set the above items and select [OK] and press the ENTER button.
NOTE: The input terminal cannot be changed to the currently projected signal.
Enter a signal name. Up to 18 alphanumeric characters can be used.
The input terminal can be changed. Switching between HDMI/DisplayPort/BNC/BNC (CV)/
BNC (Y/C)/Computer/HDBaseT/SLOT is possible.
Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. The
changes made after LOCK execution cannot be saved.
Set so that the selected signal will be skipped during auto search.
72
5. Using On-Screen Menu
Advertisement
Table of Contents
