Connection To Computer - Impact Acoustics Rapidrun 184-260 User Manual

(2) Connection to Computer (After completing this section you will have
TV functionality and you can also use your PC)
a. Place your Multi-Function Video Converter near the monitor.
b. Connect the Antenna or CATV cable to the "CABLE IN" jack on the back panel.
c. Connect the monitor's VGA cable to the "TO MONITOR" jack on the back panel. Tighten the
screws as a loose connection will cause picture distortion.
d. Connector your multimedia (computer) speaker (please note the connector should be 3.5mm
male stereo type) to "SPEAKER" on the back panel.
e. Connect the supplied 3.5mm audio cable to the speaker output of your PC sound card and
the opposite end to the "AUDIO IN" on the back panel.
f. Connect the supplied AC/DC adapter to "DC 12V" on the back panel and then plug into a
standard 110~120Volt receptacle. NOTE: Using a differently rated adapter may result in
damage to the unit, risk of electrical shock and possible fire.
g. Turn on your monitor and then push the "POWER" button on the Multi-Function Converter.
You should have a TV image on your LCD or CRT screen. Turn off the Multi-Function
converter and your computer should be displayed.
Sound Card
VGA Card
6