Procedure Of Set Up; Connection To Lcd Or Crt - Impact Acoustics Rapidrun 184-260 User Manual

(1.) Connection to LCD or CRT (After completing this section you will
have TV functionality only)
a. Place your Multi-Function Video Converter near the monitor.
b. Connect the Antenna or CATV cable to the "CABLE IN" jack on the back panel.
c. Connect the monitor's VGA cable to the "TO MONITOR" jack on the back panel. Tighten the
screws as a loose connection will cause picture distortion.
d. Connector your multimedia (computer) speaker (please note the connector should be 3.5mm
male stereo type) to "SPEAKER" on the back panel.
e. Connect the supplied AC/DC adapter to "DC 12V" on the back panel and then plug into a
standard 110~120Volt receptacle. NOTE: Using a differently rated adapter may result in
damage to the unit, risk of electrical shock and possible fire.
f. Turn on your monitor and then push the "POWER" button on the Multi-Function Converter.
You should have a TV image on your LCD or CRT screen.
Speaker
CRT or LCD

PROCEDURE OF SET UP

5
AC/DC
Adaptor