De-Registering Headsets - BT H51 Quick Setup And User Manual

5. Return the headset to the headset base for
registration. The
red and blue. It will take about 60 seconds to
complete the registration process.
6. The light will turn red when the headset is
registered but not fully charged, or turns blue
when it is registered and fully charged.
7. To check that registration has been successful,
press the button on the headset and check for
a dial tone. If registration has failed, you will hear,
"Not registered", and the
will flash slowly in red and blue.
To reset the headset, remove it from the headset
base and try the registration process again.

De-registering headsets

You may need to de-register your headsets if
you wish to register your headset to a different
headset base. Or, if you have two registered
headsets and need to replace one of them. You
must first de-register both headsets, and then
register each headset you wish to use again, one
at a time.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Add and register a headset to a BT Cordless Headset H51
light will flash quickly in
light on the headset
37