Table of Contents
Advertisement
Using the headset
Turn the headset on
Place the headset in the headset base or press and
hold
for two seconds. The
blue three times and you will hear three beeps as
it turns on.
Turn the headset off
Press and hold
will flash red three times and you will hear three
beeps as it turns off.
Make a call
If the headset base is connected to the telephone
wall socket via a cordless phone:
1. Make a call as normal using your cordless phone.
2. Press
on the headset to join the call at any
time.
3. After joining the call, you can put your phone
handset down and continue the call using the
headset.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
light will flash
for two seconds. The
Turn the headset off if it is
not going to be used for a
long time.
light
If you plug the headset into
a telephone line without a
phone connected you will not
be able to make calls (you can
only receive calls).
To help achieve the best sound
quality, the microphone should
be used approximately 70mm
from your mouth.
19
Advertisement
Table of Contents
