Using The Color Camera; Resetting The Terminal; Technical Assistance - Honeywell Dolphin 70e Black Quick Start Manual

Using the Color Camera

1. Touch Camera
2. Verify camera
3. Point the camera lens at the object you want to capture, then touch
to capture the picture.
Note: The camera lens is located on the back of the terminal.

Resetting the Terminal

There are two types of system resets: a hard reset or a factory reset. The hard
reset preserves all data stored in the file system. Contact a Honeywell
technical support representative for more information on how to perform a
factory reset.
Hard Reset (Cold Boot)
A hard reset re-boots the device and closes any open applications running in
RAM at the time of the reset.
1. Press and hold the Power button
plays.
2. Touch Reboot.
Note: To perform a Hard Reset if the touch screen has stopped responding, press
and hold the Power button
starts to re-boot. When the reset is complete, the Home screen displays.

Technical Assistance

Contact information for technical support, product service and repair can be
found at www.honeywellaidc.com.
on the Home screen.
is selected.
for approximately 8 seconds until the terminal
until the Phone Options menu dis-