Introduction; Basic Remote Operation; Vehicle Presets; Heater And Heated Seat - Nordic Start NS-1054 User Manual

Introduction

This module is a state-of-the-art remote car starter system. With many advanced functions,
this product will satisfy any one of the user's expectations from high-end commodity systems,
without neglecting the standard features commonly offered by entry-level starters.

Basic Remote Operation

Your remote car starter can operate two independent vehicles equipped with an identical
remote car starter (see multi-car operation on page 9).
The functions of the transmitter are as follows:
Pressing the
For certain vehicles:
Pressing and holding the
•
send a constant pulse as long as the
This constant pulse can be configured to activate certain functionalities such as rolling up
the windows – Please refer to your installer to see if your vehicle is compatible with
this option.
• Pressing and holding the
will send a constant pulse as long as the
seconds). This constant pulse can be configured to activate certain functionalities such as
rolling down the windows – Please refer to your installer to see if your vehicle is
compatible with this option.

Vehicle Presets

Heater and Heated Seat

When leaving the vehicle it is recommended to preset the accessory controls in preparation
for the next remote start. Settings for the blower motor (fan), front and rear, as well as
heated seats (if equipped) should not be left on
on or instead.
LOW MEDIUM

Windshield Wipers, Radio and Headlights

Certain vehicles require the radio and / or windshield wipers and / or headlight circuits to
become energized while running under remote start. When leaving the vehicle you must
ensure that the windshield wipers and headlight switches are
User Guide
and buttons simultaneously will activate the
LOCK UNLOCK
button for more than 3 seconds will lock all doors and will
LOCK
button for more than 3 seconds will unlock all doors and
UNLOCK
button is held down (maximum of 15 seconds).
LOCK
button is held down (maximum of 15
UNLOCK
. It is recommended to leave the settings
HIGH
output.
AUX 2
. Leaving the headlight
OFF
P. 3