Pre-Operating.information; Battery.installation - RadarHAWK Traveller II Operation Manual

pre-Operating infOrMatiOn
. You can use the RADARHAWK™ TRAVELLER II with your
hands-free ear piece or amplified speakers by connecting
your ear piece or speakers to the auxiliary audio jack of
the unit. You must have an ear piece or speakers with a
2.5mm ( / ˝) plug. If you have an ear piece or speakers
1
10
with different sized plug, use a 2.5mm adapter between the
plug and the jack. Please note that we do not provide ear
pieces, speakers, or 2.5mm adapters.
The. RADARHAWK™. TRAVELLER.II. is. designed. to.
operate.on.two.AA.alkaline.batteries..To.ensure.maximum.
performance,.we.advise.that.you.should.not.use.other.battery.
types.. You. may. use. AA. alkaline. rechargeable. batteries..
However,. the. resulting. battery. life. will. be. extremelly. short.
because.of.characteristics.of.rechargeable.batteries.
. Do not leave the RADARHAWK™ TRAVELLER II exposed
to extreme heat like strong sunlight. It can damage the unit
and battery.

Battery.installation

1.. Remove.the.battery.compartment.door.at.the.bottom.of.
the.unit.when.the.unit.is.powered.off.
2.. Remove.any.old.batteries.(both.batteries.must.be.replaced.
at.the.same.time.).
3.. Press. down. two. fresh. AA. alkaline. batteries. into. place,.
observing. the. polarity. indication. inside. the. battery.
compartment.
4.. Replace.the.battery.compartment.door.
5.. Turn.the.unit.on.to.verify.correct.battery.installation.