Vauxhall 2007 Vectra Operating & Safety Manual page 227

Picture no: 17721j.tif
Open coupling ball bar. Remove key and
put on provided protective clip.
When the coupling ball bar is locked the
turn knob can no longer be pulled out.
Ofrecido por www.electromanuales.com
Important
Check that the coupling ball bar is correctly
installed:
z Red marking on turn knob points
towards white marking on coupling ball
bar.
z No gap between turn knob and coupling
ball bar.
z Coupling ball bar must be seated firmly
in coupling housing.
z Coupling ball bar must be locked and
key must be removed.
9
Towing a caravan/trailer is only
permitted with a properly attached
coupling ball bar. If the coupling ball bar
cannot be properly attached, consult a
workshop. We recommend your Vauxhall
Authorised Repairer.
Eye for break-away stopping cable
In the case of caravans/trailers with brake,
attach the break-away stopping cable to
the eye. Eye - see Fig. 17721 J.
Roof Racks, Caravan and Trailer Towing
Warning
Dismounting the coupling ball bar
Close coupling ball bar.
Pull the turn knob out and then turn it
clockwise as far as it will go. Pull the
coupling ball bar downwards out of the
coupling housing and stow it in the
luggage compartment – see page 221,
Fig. 17729 J.
Insert the sealing plug in the hole for the
coupling ball bar. Fold away the socket –
see page 221, Fig. 17717 J.
Do not use steam-jet cleaners or other
high-pressure cleaners to clean the
coupling ball bar.
223
Picture no: 17722j.tif