Electronically Controlled Driving Programmes - Vauxhall 2007 Vectra Operating & Safety Manual

If the vehicle is in automatic mode, on
movement of the selector lever to
Easytronic shifts to manual mode and
changes up or down. The transmission
display shows the currently selected gear.
Move selector lever toward R
Reverse gear. Engage only when vehicle is
stationary.
Depress the foot brake, release the hand
brake and move the selector lever to R.
Reverse gear is engaged. "R" appears in
the transmission display.
The vehicle begins to "creep" when the foot
brake is released.
Ofrecido por www.electromanuales.com
It is also possible to start off in reverse
+ -
or without depressing the foot brake if the
accelerator pedal is operated directly after
moving the selector lever. If there is no
immediate acceleration or the foot brake is
not depressed, no gear is engaged and "R"
flashes. After a few seconds, the display
reverts to "N". Repeat previously described
starting procedure.
Easytronic
Electronically controlled driving
programmes
z By means of delayed gear changing
(higher engine speeds) following a cold
start, the operating temperature
programme in automatic mode quickly
and automatically brings the catalytic
converter to the temperature required
for optimum pollutant reduction.
z Adaptive programmes automatically
adapt gear shifting in automatic mode
to suit the driving conditions, such as if
the vehicle is towing a caravan/trailer,
has a high payload, or is being driven on
inclines.
z Winter programme: Press button T - see
next page.
173